How Tall is the MaxxAir FanMate Rain Cover
Question:
My Maxxair fan opens 12 inches high - will this cover accomodate that high of a vent cover?
asked by: Bill S
0
Expert Reply:
MaxxAir FanMate Rain Cover # MA00-955001 is only 9 inches high itself so a cover that opens 12 inches high would not fit. If you can control how far the lid opens manually then you could just crank it open until the lid hits the inside of the FanMate. Over-cranking once it has reached that point could damage the vent or the FanMate.
expert reply by:
Michael H
0
Product Page this Question was Asked From
MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - White
- RV Vents and Fans
- Vent Cover
- Roof Vent
- 18-1/8W x 26-1/2L Inch
- Plastic
- White
- MAXXAIR
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Grease Seal Recommendation for 32372 with OD 2.325 and ID of 1.680
- Q&A: Is 3/4" Wide Butyl Tape Wide Enough For The MaxxFan MA00-07000K?
- Q&A: Replacement LED Tail Lights for a Karavan Trailer
- Q&A: Differences Between MaxxAir 2 and MaxxAir Standard Vent Covers
- Q&A: Recommended In-Bed 7-Way Connector for a 2024 Chevy Silverado 2500
- Article: Calculating Portable Generator Power Needs
- Q&A: Does the MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA76JR have a Bug Screen
- Q&A: How To Add A Brake Controller To A 2022 Hyundai Palisade With Tow Package
- Article: 4-Step Guide to Installing RV Solar Power
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Replace or Install an RV Roof Vent
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: The Ultimate RV Camping Checklist for Your First Year RVing