Configuring Remote and Linking Remote to Touch Pad on Lippert Ground Control System

Question:

How do you link the remote control to the touch pad or controller for the Lippert Ground Control 3.0

asked by: Blan P

Expert Reply:

To configure the remote to the touch pad on a Lippert Ground Control system, # LC358590, you first need to configure the remote as follows:

1. Turn the remote on by pressing and releasing the large silver button at the bottom of the unit. If the remote has never been configured, it will display the Configuration button immediately after it is turned on. To access the Configuration button after the initial programming, push the silver button 5 times.

2. Press the “Config” button on the touch screen to begin configuring the remote.

3. Using the arrow buttons at the bottom of the screen, navigate to the specific items the remote will control.

4. When the name of the item appears in the middle of the screen, press the large “Select” button.

5. Assign an item or “None” to each of the function spaces available.

NOTE: If the unit does not have an LCI Multifunction wireless system installed, each function (Steps 1-7) will read as “NONE.”

6. Press the select button at each screen. Without an LCI Multifunction Wireless system installed on the unit, no other functions will be able to be programmed on the remote.

7. The last option will be "Configure Leveler?" Click "Yes."

8. A confirmation screen will appear on the screen showing all of the configured functions. If the unit does not have an LCI Multifunction Wireless system installed, the screen will show "NONE" for functions (Steps 1-7) and then "Leveler: Yes." Press “OK” to save the configuration or “Cancel” to edit the functions.

Then, to configure the remote to the touch pad take the following steps:

1. Enter the Leveler app on the LINC Remote.

2. Turn the remote on by pressing and releasing the large silver button at the bottom of the unit.

3. Press the “OK” button on the touch screen to access the Function Menu.

4. Press the Leveler App button.

5. With the interface turned off, press LEFT five times, and then RIGHT five times.

6. The LCD on the interface should read “Wireless Configuration”.

7. Click any button on the LINC remote in the Leveler App.

8. The LCD on the interface should read “Successful!” Your wireless Level-Up system is now ready to use.