Thickness of the 4-Leaf Slipper Spring SP-040275
Question:
Can you tell me how thick the spring pack is at the axle mounting point.
asked by: Mike
1
Helpful Expert Reply:
I went and grabbed a 4-Leaf Slipper Spring # SP-040275 from our warehouse to measure it and found that it is 1-7/8 inches thick if you only look at the leafs. If you add in the bolt that runs down the center you would add 1/2 an inch to the overall thickness.
expert reply by:
Jameson C
1
click to enlarge
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 3700 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 30 Inch Long
- Universal Group
more information >
Continue Researching
- Q&A: What is Distance Between Mounting Holes of Dexter A-60 Coupler
- Article: Trailer Tire Sizing
- Q&A: Is There Plastic Wear Pad Between 1-3/4 Inch Wide Slipper Spring e49SR & Frame
- Q&A: Trailer Axle Weight Rating for 2 Inch Square Axle
- Q&A: Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles
- Q&A: Are Radius End And Flat End Slipper Springs For A Trailer Interchangeable?
- Q&A: Recommended Front Hitch for a 2022 GMC Sierra 1500
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Double-Eye Trailer Suspension System Review
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle