Trailer Hub Bearing Kit Recommendation for 1990 Coleman Pop Up Camper L44649
Question:
Can you send me all the parts needed for a 1990 Coleman popup camper. I took the wheels and then removed the hubs. The bearing number is L44649. Im looking for all the part numbers including grease cap, times 2 for both wheels. If you can send a shopping cart even better. Thanks much.
asked by: Kitchen
Expert Reply:
Since your hubs have inner and outer bearing numbers L44649 the correct bearing kit you would need is the part # BK1-150.
I attached a trailer bearing install video for you to check out as well.
For the standard spindle you would use the TruRyde Grease Caps, # RG04-020.
If you have a E-Z Lube spindle, with a grease fitting in the end of the spindle, you would use the TruRyde Grease Caps, # RG04-040.
Products Referenced in This Question
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Replacement Strap for Valterra Garden Hose Inlet Cap - 8" - Black
- Shop: Bauer Products T-Handle Lock for Truck Caps - Counterclockwise - Gloss Black
- Shop: Bauer Products T-Handle Lock for Small Truck Caps - Clockwise and Counterclockwise - Gloss Black
- Shop: Truck Tailgate Lock
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Trailer Hitch Receiver Sizes
- Q&A: What Size is the Zerk Fitting on the Reese Goose Box RP85FR?
- Q&A: Replacing Grease Zerk on Reese Goose Box 2nd Generation Hitch
- Q&A: Converting from Electric Brakes to Disc Brakes on Grand Design 5th Wheel
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Possible Solution for Replacing Trailer Bearing L44543
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: Bearing Buddy And Spindle Grease Seal For The AKIHUB-545-2-1K Idler Hub Assembly