Hub Recommendation with 8 on 6-1/2 inch Bolt Pattern For Timbren Axle Less ASR35HDS02
Question:
Is there an 8.5x6.5 bolt circle hub/drum or idle hub that will fit this axle?
asked by: Bill
0
Expert Reply:
Yes, the part # 8-219-50UC3 is a hub/drum with a 8 on 6-1/2 inch bolt pattern that will fit the spindle of the Timbren part # ASR35HDS02.
expert reply by:
Jameson C
0
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Tire Sizing
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: Can Trailer 4-Way be Ran to Trailer with 8 Wires for Trailer Wiring
- Q&A: How to Replace a 4-Way Trailer Connector with 8 Wires
- Q&A: Using Passenger Car Tires on Trailers
- Q&A: Replacement For Fulton Drop-Leg Stabilizer Jack
- Q&A: Hubs with 5 on 5 Bolt Pattern that Will Fit a Timbren Axle-Less Suspension System
- Article: Best RV Roof Vents
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height