Why Is Kodiak Disc Brake Kit # K2HR35D-8 Limited To 13 Inch Wheels
Question:
Is there any reason these wont work with 14inch or wheels?
asked by: Nate
Expert Reply:
The reason the Kodiak Disc Brake Kit, part # K2HR35D-8 is limited to 10 inch to 13 inch wheels is because of the hub surface.
My contact told me that the rotor size at 8 inches would not have enough mating surface for the wheel and can cause it to wobble if too large of a wheel is installed on the hub. The bolt pattern may be the same but the hub is not designed for a larger wheel.
If you have a 14 inch wheel and it has a 5 on 4-1/2 bolt pattern I recommend part # K2HR35D. This uses the same size inner and outer bearings as the # K2HR35D-8 system but is designed for wheels that are 13 inches or larger because it has a larger hub.
Products Referenced in This Question
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Rotor With Hub For 2008 Tahoe Boat Trailer Q5SA
- Q&A: Replacement Trailer Wheel Hubs for 2005 Tahoe Boat Trailer
- Q&A: Installing 7-Way Trailer Connector on 2005 Ford E-150 Van
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: How to Determine Compatible Replacement Trailer Hubs
- Q&A: Will a 10 Inch Brake Drum Fit Behind 12 Inch Wheels
- Q&A: Can 7 Inch Electric Trailer Brakes Be Used on a 3500 Pound Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Adding Electric Over Hydraulic Disc Brakes