Can Spindle On Timbren Axle-Less Trailer Suspension System Be Reversed
Question:
Desinging a bed trailer for handling heavy, bulky items similae to safes. Regarding Timbren P/N ASR3500S05....3500lb axleless trailer suspension system. Is the spindle mounting bolt pattern uniform so the spindles can be mounted reversed so the spindle is on the same side as the nut extending from the Timbren unit...ie opposite side of the vertical frame mounting plate? Will this reverse mounting have any impact on wheel alignment? Is the Timbren unit adjustable for wheel alignment toe-in, camber, etc. or is it fixed? Are there actual Timbren mounting and alignment instructions available for downloading? Thanks.
asked by: Jim
Helpful Expert Reply:
You can reverse the mounting of the spindle mounting on the Timbren Axle-Less Trailer Suspension System, part # ASR3500S05. I verified this with my contact at Timbren.
The toe-in will need to be set when installing this system and it comes with shims that allow you to adjust the camber. The installation instructions that are included explain how these adjustments are made.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How to Determine Fender Clearance when Timbren Axle Less TASR5200S03 is Installed on Trailer
- Q&A: What Height is Recommended When Setting the Fender Height Above the Trailer Tire?
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Search Results: asr3500
- Q&A: Hubs with 5 on 5 Bolt Pattern that Will Fit a Timbren Axle-Less Suspension System
- Article: Trailer Wiring Diagrams
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Q&A: Availability of Timbren Axle Less System part # ASR2000S02
- Q&A: How to Pick Out Replacement Trailer Axle for Boat Trailer
- Q&A: What Hub Has a 5 on 4 1/2 Bolt Pattern That Works with Timbren Axle-Less Systems
- Article: Most Popular Wheel Bearings
- Article: Where to Position the Trailer Axle?
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Trailer Tire Sizing
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Measure a Trailer Axle