Using 215/60-8 Tires on Golf Cart
Question:
Looking at buying two of your Kenda 8 inch galvanized 4 on 4 wheels load range c for use on my golf cart. Is this a good application? Thank-you.
asked by: Arnie B
Helpful Expert Reply:
The Kenda # AM3H300 consists of a 215/60-8 tire on a 8 x 7 inch rim with a 4 lug on 4 inch bolt circle. The tire is 8.9 inches wide and 18.3 inches in diameter. If this is compatible with your existing tires and wheel bolt pattern, this wheel/tire combo should work great for you.
Keep in mind that this tire is about a 1/2 inch wider than a typical golf cart tire. As long as you have the extra 1/4 inch of clearance to the inside of the tire, it should fit well.
Product Page this Question was Asked From
Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 215/60-8
- 8 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Is Trailer Tire Size 18.5 x 8.5 x 8 the Same as Trailer Tire Size 215/60-8
- Q&A: Speed Rating Of Kenda Bias Trailer Tire AM30130
- Q&A: Replacement Snowmobile Trailer Wheels/Tires with 4-on4 Bolt Pattern
- Q&A: Replacement Tire for a 18.5-8.5-8 Tire
- Q&A: Does the Center Pilot Hole of a Trailer Wheel have to be Exact
- Q&A: Adding Wider Tires to Small Sailboat Trailer For Better Performance on Sandy Beaches
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Article: Trailer Maintenance Schedule
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Where to Position the Trailer Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern