Wiring In New Boat Trailer Lights with Green, Yellow, Green/Brown, and Yellow/Brown Wires
Question:
my trailer light wires colors are green and green blown and yellow and yellow blown and I got a new plug the wires colors are yellow, green, blown, and white and im trying to hook them together but dont know what colors go together
asked by: Randy C
Expert Reply:
Sometimes the functions of the wires are listed on the light housing where the wires come out of the light.
It is likely that green/brown is running lights for the right side, green is right turn signal and brake lights, yellow/brown is running lights for the left side, and yellow is left turn signal and brake lights.
Once you have determined the functions of the wires you can connect the new parts. The new plug should have the following functions: white is ground, brown is running lights, yellow is left turn/brake lights, and green is right turn/brake lights.
Product Page this Question was Asked From
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Draw-Tite
more information >
Continue Researching
- Q&A: Does The Draw-Tite trailer Hitch Receiver Come With One Or Two Hitch Pin Holes
- Q&A: Replacement Hub and Drum Assemblies for AL/KO 8460 Hubs and Drums
- Q&A: Replacement Zerk Fitting Recommendation for Dexter EZ Lube Spindle
- Article: Trailer Wiring Diagrams
- Q&A: Can 12 Volt Accessory Circuit of Trailer Wiring Keep 10 Amp Breakaway Battery Topped Off
- Q&A: Recommended Roof Rack Crossbars for Lance Cab Over Camper With Factory Tracks
- Q&A: Can You Install a 5th Wheel Hitch On a 2021 GMC Sierra 2500
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Trailer Tire Sizing
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Troubleshooting 4 and 5-Way Wiring Installations