Replacement Conical Tooth Washers with 3/4 Inch Inner Diameter for Curt Weight Distribution
Question:
I need to replace the washers on a one year old weight distribution hitch when I upgrade the two bolts that attach the variable-position ball mount which are 3/4 inch diameter. Id like to order this set of four washers so that Ill then have all new hardware, but need to know if the inner diameter is 3/4 inch. Thanks in advance for your help!
asked by: Tom A
0
Expert Reply:
Yes, the replacement conical tooth washers # C17314 do indeed have a 3/4 inch inner diameter for use on a Curt weight distribution head.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Curt Weight Distribution Conical Washer Replacement Kit
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Washers
- CURT
more information >
Continue Researching
- Shop: Curt Weight Distribution Conical Washer Replacement Kit
- Video: Curt Weight Distribution C17314 Review
- Video: Review of Draw-Tite 01292006-020-01
- Shop: Draw-Tite Trailer Hitch Conical Tooth Washers - 3/8" Diameter - Qty 1
- Shop: Replacement Head Adjustment Hardware for Curt Round Bar Weight Distribution Systems
- Video: Review of Curt - Weight Distribution - C17114
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Shop: Towing Mirrors
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 9" Long - 7 Hole Adjustment
- Shop: Trailer Hitch
- Shop: Roof Rack
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Video: Review of Fastway Replacement e2 Weight Distribution Shank - FA92-02-4100
- Q&A: How to Pick Out Replacement Hardware for Trailer Hitches
- Search Results: fastway e2 shanks
- Search Results: tpms
- Search Results: fastway shank
- Search Results: fastway e2
- Video: Americana Metal Bolt-In Valve Stem Review
- Q&A: Is There a TPMS Without Repeater
- Q&A: Will Curt Weight Distribution Shank # C17100 Fit Curt Weight Distribution
- Q&A: Which Pin On A 7-Way Should Have Constant 12V Power When Vehicle Is Running
- Q&A: 3/4 Inch Conical Tooth Washers for Fastway e2 Weight Distribution Systems
- Q&A: Effects Of Tilting Trailer Ball Mount On Weight Distribution System
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Correct Replacement for Lippert Stabilizer Jacks Model 337199
- Article: How to Mount a Truck Bed Camper
- Article: How to Raise Your Travel Trailer Height
- Article: 7 Common Questions Everyone Has About Trailer Tires