How To Determine What Bearings Are Needed On Travel Trailer
Question:
Wondering what the bearings would be for a 5.30-12 trailer tire
asked by: SHAWN
Helpful Expert Reply:
When replacing bearings on a trailer, you will need to know what size bearings will fit the spindle on your trailer axle. The best way is to remove the old bearings and check for the numbers on the bearing. That way you get an exact match. If you are unable to find the numbers on the bearing, you will need to measure the spindle surface as shown in the attached drawing to make sure you get the right size.
Because the load range can vary on tires that are 5.30-12 it would be difficult to say what size bearing should be used on your system.
Product Page this Question was Asked From
Kenda K353 Bias Trailer Tire - 5.30-12 - Load Range B
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range B
- 5.30-12
- 12 Inch
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Trailer Modifications and 8 inch to 12 or 13 inch Tire and Wheel Upgrade Recommendations
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Trailer Tire Speed and Weight Ratings
- Q&A: Is The 5.30 X 12 Tire Size Available Without a Wheel
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Widest Trailer Tire Size to Fit on 12 inch Trailer Wheel
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Measure a Trailer Axle
- Article: Stability Control for Heavy Duty Vehicles
- Article: 2023 Best Gifts for Boaters & Fishing Enthusiasts
- Article: Measuring a Trailer Tire