Recommended 1200 lb Fulton Swivel Jack for Utility Trailer
Question:
I need advice about which product to get: Im looking to add a Fulton swivel trailer jack with wheel to my utility trailer. Doesnt need to be more than 1200 pound capacity. My a frame tongue is made of angular steel, with the horizontal section on top, and the vertical section running along the outside of the A frame. Which Fulton swivel trailer jack with wheel is appropriate for this type of tongue. Thanks!
asked by: Rick
Expert Reply:
Are you speaking of an angle-iron type frame, or a C-channel?
The Fulton # FTJ120W0301 you referred to which is a weld-on application would be an excellent choice. A bolt-on version is available, part # FTJ12000101. Both jacks are identical except for the way they'd mount to the trailer.
If you have an angle iron frame and not the C-channel, I wouldn't use the bolt-on version without boxing out the spot on the trailer frame where you're wanting to install the jack. A piece of square tubing could be used to box out the frame, but the tubing would need to be tack welded into place.
I've linked you to product description videos for the jacks I recommended.
Products Referenced in This Question
Fulton Round, Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,200 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Bolt-On
- With Wheel
- Fulton
more information >
Product Page this Question was Asked From
Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement for Shelby Industries Model 5756 Boat jack
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Is There a Replacement for a Shelby Jack 5856A That Uses Existing Bracket
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Trailer Jack Recommendation for Shelby # 5856A
- Q&A: Recommendation to Replace Shelby 5756A Trailer Jack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Jack for Bulldog Model 130 Marine Jack
- Q&A: Replacement Parts and Winch for a Profile 2000 Hand Winch
- Article: Best Boat Trailer Jacks
- Article: Trailer Jacks
- Article: Trailer Maintenance Schedule
- Article: Pintle-Hitches
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer