Trailer Lights and Accessories with Lights Not Working When Connected to Tow Vehicle
Question:
I asked a question yesterday but now the running light on the tailgate light isnt working but blinkers are?
asked by: Ryan
Expert Reply:
It sounds like you might have a dirty or corroded trailer connector on the vehicle. This is a common occurrence since connectors are exposed to the elements. If the connector is a 4-Way flat then if you have a small wire brush you can clean the pins. A small screwdriver could also work but it takes longer to clean out the corrosion.
If you have a 7-Way trailer connector you can use a wire brush to clean the pins but also you will want to check the back of the connector where the wires attach and clean away any corrosion.
It is also possible that there is a bad tow package fuse, fuses, or relay(s) that need to be replaced.
Product Page this Question was Asked From
Adapter 7-Pole to 4-Pole and 5-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 7 Round - Blade
- Plug Only
- 4 Flat
- 5 Flat
- Hopkins
more information >
Continue Researching
- Q&A: Does the Tekonsha P3 Trailer Brake Controller Turn Off or Stay On All the Time
- Q&A: Recommended Hitch for a 2024 Mazda CX-90
- Q&A: Why Does My Brake Controller Light Stay On After Vehicle is Turned Off
- Article: Trailer Wiring Diagrams
- Q&A: Replacement 4-Pin Plug For Truck Camper
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Possible Light Replacement For Monarch 5129 On 1977 Great Divide Trailer
- Q&A: Draw-Tite DT78MR vs 76104 That Fits 2021 Jeep Wrangler
- Q&A: Recommended Trailer Connector And Wiring Harness For 2014 Jeep Wrangler Unlimited With Tow Package
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Best Camper Jacks
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Raise Your Travel Trailer Height