Axle Capacity of 1-1/2 Inch Square Axle.
Question:
Hi- I was wondering if you could help me determine what my axles are rated for. They are an old axle and they are 1.5inch square tubing. I cant find a marking any where. The inside hub bearing is a timken m12649. Any help would be appreciated. Thank you
asked by: Justin Z
Expert Reply:
The only way to know for sure the capacity of your axle is based on the information from the manufacturer when the axle is new. Typically, 1-1/2 inch square axels have a capacity somewhere between 1,000 - 2,000 pounds. Sometimes the spindle and hub can also help point us in the direction of finding axle capacity, but even then it is still an approximation since it is impossible to tell if they are the same size as what came on the axle.
The bearing number your provided does not match any of our axles or hubs, and it is not a typical size for a trailer bearing. This makes it more difficult for us to determine the actual capacity of your trailer axle.
Buying a new axle is the only way to be sure of your axle's capacity. I have also attached a link to our trailer axles. If you would like to let me know the hub face measurement, the spring center measurement, the wheel bolt pattern, and brake type, I will be happy to make an axle recommendation for you.
I have attached a diagram of where to measure to find the hub face and spring center measurements for you.
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer light kit
- Q&A: Will the BK2-100 Bearing Kit Fit On a Trailer with LM12749 Outer Bearings
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Shop: 2-1/4" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: 2-1/4" Long Torx; Floor Screws, 40/Pkg
- Search Results: aluminum decking
- Search Results: decking screws
- Search Results: axel
- Q&A: Can Surge Brake Trailer with Atwood Actuator be Converted to Electric Over Hydraulic
- Q&A: Surge Brake Actuator to Replace Atwood 82543
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine Axle Weight Rating of Old Boat Trailer with Worn Label
- Search Results: safety chain hooks
- Search Results: 13 tires
- Q&A: Replacement Axle With 58" Spring Center And 1-1/16" Spindles
- Q&A: What is the Air Pressure Rating for a 4.80-12 Load Range C Trailer Tire
- Article: Most Popular Wheel Bearings
- Search Results: 2k7158
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Video: Optronics Standard Trailer Light Kit Installation
- Video: Review of etrailer 4 Leaf Double Eye Spring - e77SR
- Q&A: Spring Seat Spacing for Upgrading to 5,200 lbs Axles on a 2006 Forest River Fifth Wheel
- Video: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles Installation
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T20BTR-EZ-7258 Review
- Video: TruRyde Trailer Bearings Races Seals Caps - Seals - 34823 Review
- Video: Review of Polar Hardware - Locking T-Handle Latch - PLR5710