Installation Position and Location of the P-3 and Prodigy Brake Controller on a 2010 Chevrolet Truck
Question:
It sounds like neither the P-3 nor the Prodigy need to be installed in the level position. Is this correct? Also, if this is correct do you want to have the controller mounted so you can reach it without stretching too far?
asked by: Dan
Expert Reply:
You are correct the P-3, item # 90195, and the Prodigy, item # 90885, do not need to be installed level front to back but it does need to be level side to side and parallel to the direction of travel for proper operation. The Prodigy will automatically acquire the proper level setting and will also automatically adjust as you travel up or down hills. I have linked directions for you to review.
Any brake controller needs to be installed within easy reach of the driver and where the display can be viewed while driving. This allows the driver to set the controller easily when differing road conditions are encountered and allows the driver to apply the trailer brakes manually if needed.
I have also provided links for a video and installation details for you to review.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Does the Tekonsha P3 Trailer Brake Controller Turn Off or Stay On All the Time
- Q&A: Parts Needed To Install A Brake Controller On A 2023 Freightliner Cascadia
- Q&A: Suspension Enhancement Recommendation for 2019 Toyota RAV4
- Q&A: How Does Brake Controller Install on Freightliner S2RV Chassis
- Q&A: Parts Needed to Add 7-Way & Brake Controller on 2023 Kia Sportage
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes