Hitch and 2-5/16 Hitch Ball Recommendation for a 2002 Mercury Mountaineer
Question:
My suv has a 1-1/4 hitch receiver need the ball mount that goes into the receiver with a 2-5 /16 ball.
asked by: Reynaldo G
Expert Reply:
The problem is that the ball holes of ball mounts for a 1-1/4 inch hitch are all 3/4 inch in diameter and thd 2-5/16 inch balls are all for 1 inch diameters and up. The reason for this is that trailers that call for that big of a ball are going to be too heavy for a 1-1/4 inch hitch.
The only solution I would have for you would be to upgrade to a 2 inch hitch like the part # 75132 so that you can go with a ball mount that will accommodate a 2-5/16 inch ball on your 2002 Mercury Mountaineer. This hitch will fit underneath your factory hitch.
The recommended ball mount is the part # AMSC2. For a 2-5/16 inch ball you would want the part # C40007.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 10000 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Determining Trailer Tongue Weight
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What Style of 7-Way Plug Does the Electric Jack w/ Footplate and 7-Way Plug Use
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Weight Distribution Solution for Trailer that Has Angle Iron Frame Design
- Q&A: Will Existing Trunnion Bars Fit Reese Replacement Weight Distribution Head, Part # RP58167
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed to Install Redarc Tow Pro Elite in 2008 Dodge Sprinter with 7-Way
- Q&A: Replacement 2-5/16 Inch Hitch Ball for Blue Ox Track Pro Weight Distribution System
- Q&A: Correct Weight Distribution Hitch for Trailer With 7,000 lb GVWR
- Q&A: Troubleshooting External Sensor Error on Lippert Leveling System