How to Provide Maintenance Charge to 2014 GMC Sierra 1500 battery While Flat Towing Behind RV
Question:
I recently a drive line disconnect and Blue Ox towing package installed on my 2014 GMC 1500 Sierra two wheel drive, i need to leave the key on to while towing is there a power disconnect or fuse that can be removed so my batteries say charged?
asked by: Ken B
Expert Reply:
The first thing you are going to want to do is look up GM technical service bulletin 13-00-89-007 for information on disconnecting the truck battery. The battery does have to be disconnected to flat tow your 2014 GMC Sierra. Consult the truck owners manual to confirm.
To keep a maintenance charge on the battery I recommend using a harness such as # BX88206 with the tow bar wiring you will be using so that you can run a wire from the connector at the front of the truck to the vehicle battery.
There are a couple of ways to do this. First, you can tap into the running light circuit in the tow bar wiring but to provide power to the battery the RV running lights would have to be on all the time. Or if the connector at the back of the RV has a working 12 volt circuit you could use that circuit instead.
Which ever way you choose you would just attach the wire to the appropriate corresponding pin at the back of the connector that will be at the front of the truck and the other end of that wire will go to the positive battery terminal.
Products Referenced in This Question
Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord
- Accessories and Parts
- Tow Bar Wiring
- Adapters
- 7 Round - Blade to 6 Round
- Coiled Cord
- Blue Ox
more information >
Product Page this Question was Asked From
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller Installation on a Ford Full-Size Van
- Q&A: How To Connect 4-Way Flat Vehicle Connector To 7-Way on Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Q&A: Parts Needed to Install 7-Way Trailer Connector on 2021 Honda Odyssey
- Q&A: Trailer Hitch for a Lance Travel Trailer
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Q&A: Parts Needed For Tekonsha Prodigy P2/P3 Trailer Brake Controller on 2001 Ram 1500 No Tow Package