Adjustable Ball Mount that Reduces Rattle In 2-1/2 Inch Receiver
Question:
Do you have any adjustable ball mount product that Does Not rattle while matted to a 2.5 class V receiver? Also, whats suggested for a stock 2014 Ram 2500 4x4 matted to trailer hitch height 16
asked by: Jim F
0
Expert Reply:
All ball mounts will rattle a little or you would not be able to fit them inside the receiver. I recommend part # DTSTBM6625. It has an adjustable pin in the top of the shank that protrudes through the adapter that prevents rattling. The attached balls measure 2 inches and 2-5/16 inches. I have attached a photo that shows where the adjustment is made to tighten the ball mount once it has been installed in the receiver opening.
expert reply by:
Chris O
0
Continue Researching
- Q&A: Recommended Ball Mount with Best Ground Clearance and 10 Inch Drop
- Q&A: What Does LRC Mean on ST205/75R15 Trailer Tire
- Q&A: Demco Autoslide 5th Wheel Fitment with 2023 GMC Sierra 3500 Short Bed with OEM Puck System
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight
- Article: How Much Trailer Can I Really Tow
- Q&A: Picture of Set Screw that Remove Ball Movement in the Gen-Y Torsion 2-Ball Mount # 325-GH-1824
- Q&A: How to Install a Fifth Wheel Lube Plate on a 5th Wheel Hitch
- Q&A: Why Is a 10" Lube Plate Recommended for a B&W Companion Instead of 12"
- Q&A: Can Stationary 5th Wheel Hitch be Used for a 2020 Chevy Silverado 2500 with 6-3/4 Bed
- Article: Steel vs. Aluminum Ball Mounts
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Testing Breakaway Systems