How to Pick Out Replacement Bearings and Seal for Trailer Hub
Question:
what size inner bearing and outer bearing and seal please give me the number of each
asked by: Willard D
0
Expert Reply:
To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers off of them.
Or, you can measure the spindle where the bearings and seal ride so that we can pick you out the correct bearings that would fit the spindle.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Bearing Buddy And Spindle Grease Seal For The AKIHUB-545-2-1K Idler Hub Assembly
- Q&A: How to Bleed Brakes With Dexter Zinc-Plated Brake Actuator
- Q&A: Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Options For Replacing A Tie Down Turbo Lube 48394 Clear Oil Bath Cap
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
- Article: Adding Electric Over Hydraulic Disc Brakes