What is the Torque Rating for Trailer Hub Oil Cap Kit # 21-36
Question:
Do you have a tool or wrench available for this oil cap to make sure we dont crack it when assembling? Also, what is the best way to ensure it is torqued correctly?
asked by: Tom B
1
Helpful Expert Reply:
There isn't a special wrench that we carry for oil caps such as # RG04-270. But you probably won't need one because the manufacturer recommends to install the caps to 20-30 foot pounds. You might be able to get to that by hand. Otherwise some channel locks could work. Just be cautious to not over-tighten.
expert reply by:
Michael H
1
Product Page this Question was Asked From
Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 3.984 Inch O.D.
- Redline
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Diameter Holes are Required For The LED Trailer Mini Clearance Lights MCL10AKB & MCL11RKB?
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Brake Assembly Recommendation for 2005 Wells Cargo Cycle Wagon Trailer with Dexter 3500 lb Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Q&A: What Replacement Disc Brakes do I Need for My TDE46890 System?
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Torque Rating for Spindle Nut on Trailer Hubs
- Q&A: Is there a Replacement for Dexter Nev-R-Lube Hub 008-386-80
- Article: Trailer Maintenance Schedule
- Article: Best Bike Racks for Electric Bikes