Recommended Parts To Convert Surge Brakes To Electric-Over-Hydraulic Brakes On Tandem Boat Trailer
Question:
Do you have a kit to convert surge brakes on an EZ Loader boat trailer to electric brakes?
asked by: Stanl S
Expert Reply:
Since you have hydraulic brakes on your trailer, there are only a couple things you will need. The first thing I recommend is the Electric Over Hydraulic Brake Actuator, # K71-651. You will want to make sure you mount this unit as far forward on the trailer tongue to avoid getting it submerged.
You will need a brake controller for electric-over-hydraulic systems like part # 90195. This is one of our best brake controllers because it is easy to install and operate.
The breakaway kit I recommend is the Dexter Breakaway Kit, part # 34-285. I have attached a product review video for this kit you can check out.
It is not necessary to replace the coupler on your trailer. Many folks will drill a hole through the coupler and insert a bolt and nut to keep the coupler from actuating. Some couplers have a lock that does the same thing.
If you still want to replace the coupler I have attached a link to the couplers we offer. You can use the filters on the page to find a coupler that will work with your trailer.
You will need trailer and vehicle wiring to accommodate the brake controller. If you want to let me know what the year make and model of your vehicle is I will be glad to make some recommendations that will work for you.
Products Referenced in This Question
Dexter Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-axle
- Tandem-axle
- Dexter
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Q&A: Replacement For Fulton Drop-Leg Stabilizer Jack
- Article: Trailer Wiring Diagrams
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Where to Position the Trailer Axle?
- Article: Flat Towing Package for 2008-2011 Honda CR-V
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)