Will Titan Hitch Box Extension # RP45018 Work with 3/4 Ton Diesel Pulling Horse Trailer
Question:
Hi there, I have a 3/4 ton Diesel truck that has an 8 foot box, I have a box mount camper that is very large no pull outs and I am unaware of its weight but I imagine that it is very heavy. I have measured the length of this camper it is just shy of 11 feet long 10 feet 10 inches so it extends 3 feet from the end of the box. I also have 3 horse trailer that I will haul 2 horses in. Trailer weighs roughly 2500 lbs, each horse is 1100 lbs plus saddles etc in the front tack room. Roughly the trailer with horses and tack would be 4900 - 5000 lbs. Is this extended hitch heavy duty enough for my application and what other stabilization chains/bars would I require? My main focus is safety as my family will be travelling in the truck with me. Thank you,
asked by: Camas W
Expert Reply:
The Titan Hitch Box Extension, # RP45018, that you mentioned is designed for use with a 2-1/2 x 2-1/2 inch receiver (may not work on some OEM Class V hitches with rounded edges) and offers two extension lengths. 41 inches which has a weight carrying capacity of 5000 pounds, 500 pound tongue weight capacity and with a weight distribution system, 7500 / 750 pounds or 48 inches which has a weight carrying capacity of 4000 pounds, 400 pound tongue weight capacity and with a weight distribution system, 6000 / 600 pounds. No additional chains or bars are required for this set-up.
Since you estimate the weight of the loaded trailer to be very close to 5000 pounds, you would be limited to using this extension at 41 inches and would be at maximum capacity. In this case I would suggest looking into adding a weight distribution system. I have included a link to our weight distribution systems for you.
A key component to choosing the correct weight distribution system is knowing the trailer's exact tongue weight. Tongue weight is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. The ideal situation is to have the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
Another option that you may want to consider is a TorkLift SuperHitch with a SuperTruss Hitch Extension. This is a heavy duty hitch that offers a higher capacity when using an extension. To see if we have a TorkLift hitch available for your truck just send me an email with year, make, and model and I would be happy to check for you.
As always, you will want to make sure that you do not exceed the capacities of any component in your towing set-up, including the vehicle and your trailer hitch receiver. To determine the capacity of your truck you can take a look at the ratings sticker on the driver's side door jamb. On the sticker look for the Gross Combined Weight Rating, GWCR, which is the maximum amount the truck plus the fully loaded trailer can weigh. From that, subtract the GVW (the curb weight of the vehicle), gasoline, cargo, passengers, and the weight of the box mount camper. The result you get will be the maximum trailer weight your vehicle can handle.
Product Page this Question was Asked From
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
- Hitch Adapters
- Hitch Extender
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Trailers
- 41 - 48 Inch Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- 5000 lbs
- Reese
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
- Search Results: 48 inch hitch extension
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Shop: Trailer Hitch
- Q&A: Difference Between Weight Carrying and Weight Distribution Ratings on a Titan Hitch Extender
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End
- Shop: Deka Wire - Jacketed 7-Wire - per Foot
- Shop: Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End
- Shop: Hopkins Cross-Check Trailer Level - Magnetic Back
- Shop: Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End
- Video: Review of Gen-Y Hitch Hitch Anti-Rattle - Anti-Rattle Clamp 2-1/2 Inch Hitch Receiver - GY28XR
- Q&A: Option for Extending 2-1/2 inch Hitch on a Ford F-350
- Q&A: Hitch Extender that Can Fit 2.5 inch Hitch of 2017 Ford F-250
- Q&A: Availability of 41 Inch Long Hitch Extension for 2017 Ford F-350
- Q&A: Is it Recommended to Shorten the Length of the Titan Hitch Extension for 2-1/2 inch Trailer Hitches
- Q&A: Ball Mount Recommendation for a 2013 Ford F-350 with Factory 2-1/2 Inch Trailer Hitch
- Q&A: Square Corner Ball Mounts Will Not Fit in Factory Trailer Hitch to 1993 Ford F-250 Diesel
- Video: Hollywood Racks RV and Camper Bike Racks Review - 2022 Jayco Greyhawk Motorhome
- Video: Swagman RV and Camper Bike Racks Review - 2019 Fleetwood Bounder Motorhome
- Search Results: bike rack
- Video: Review of TorkLift Hitch Adapters - Hitch Extender - TLE1648