Hitch and Weight Distribution Recommendation for 2006 Toyota Sienna for Towing Pop-Up Camper  

Question:

Expert Reply:

Your 2006 Toyota Sienna can be fitted with two sizes of hitch, a 1-1/4-inch Class II type like # C12065 or a 2-inch Class III type like # C13105. You must have a 2-inch Class III hitch in order to use a weight distribution (WD) hitch on your car. The sticker on your hitch will tell you if it is rated for use with WD systems.

A WD system must be tuned to the actual loaded trailer tongue weight in order to work properly. You need to measure the fully loaded camper's tongue weight, just as it will be when you head out, and to that add the weight of anything in the rear of the Sienna that is behind the rear axle, such as a loaded cooler or generator, for example. Once you know this total effective TW you can choose a weight distribution/sway control system like the Reese SC. The linked article explains ways to measure tongue weight.

You can use the link provided to look for a WD system that suits your pop-up by clicking on the appropriate TW figure. Then use the filters on the page to choose your type of brakes, electric or surge, to see suitable systems.

If for example your TW is 400-lbs and you have electric brakes then a great option is the Reese Strait-Line WD system # RP66082 that actually prevents trailer sway before it can start. You may care to have a look at the linked article on WD systems for more information to help you choose a suitable system. Or you can let me know your TW and type of trailer brakes and I'll be glad to offer additional guidance.

expert reply by: Adam R

0