Recommended Torque Specs for 9/16 and 1/2 Inch Trailer Suspension Hardware
Question:
I am installing new springs bolts , shackels and u bolts on 5200lb tandem axles could you please tell me the recamended torque specs on the bolts and U bolts please and also if you recommend locktite to be used if locking nuts are not being used .
asked by: Mike S
Expert Reply:
If you will be using 9/16 inch fasteners then torque them down to 110-114 foot pounds. If using 1/2 inch torque them to 76-78 foot pounds. You can find all sorts of different torque specs for the same size bolts or nuts and they will all be around these same figures.
If you use Loctite use the blue kind, such as # LT37643, which will allow you to remove parts using hand tools. The red kind is going to be too strong. Also make sure the Loctite only goes on the threads and on any part that needs to move with the suspension.
Products Referenced in This Question
Loctite Blue Stick Threadlocker - Medium Strength - 1/4" to 3/4" Nut/Bolt - 0.32 Oz Stick
- Lubricants Sealants Adhesives
- Sealant
- Nut and Bolt Sealant
- 0.32 oz
- Loctite
more information >
Product Page this Question was Asked From
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Trailer Leaf Spring Suspension
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 3 Inch Long
- ABS Fasteners
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What Are the Torque Specs for Trailer Suspension Parts
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: Leaf Spring Bushing - Bronze - 1.74" Long x 0.70" OD x 0.58" ID - Qty 1
- Video: Review of Lippert Components Trailer Leaf Spring Suspension - Correct Track Axle Hanger - LC303917
- Search Results: load master
- Search Results: roadmaster
- Search Results: comfort ride
- Search Results: slipper springs
- Search Results: 2580
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Q&A: Are the Wet Bolts in the MORryde Suspension Upgrade Kit a One Time Use
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Shackle Kit for Equa Flex LC279688 with Wet Bolts and Bushings
- Q&A: Replacement Wet Bolt and Bronze Bushing For a 2022 Grand Design Imagine 2800BH With MORryde CRE 3000
- Q&A: Correct Replacement Wet Bot for Grand Design Trailer with MORryde CRE300 Equalizers
- Shop: Suspension Enhancement
- Q&A: Torque Spec For Leaf Spring Shackle Bolts
- Shop: Dexter Bronze Bushings - Qty 4
- Q&A: Torque Spec for 9/16" x 3" Long Bolt for Suspension
- Shop: Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Search Results: 59561
- Search Results: 22575r15
- Article: Printable Trailer Bolt Hole Pattern Template
- Video: Review of Dexter Axle Trailer Brakes - 12 inch Electric Drum Brake Kit - 23-105-106
- Shop: Fifth Wheel Hitch
- Shop: RV Camera
- Shop: RV Exterior Lighting