Bearings for the Dexter 8-201 Hub/Drum
Question:
I have 4 Dexter 8-201 hub/drums but the Inner bearing is way too big for my #42 spindles The outer bearing is correct LM67048 1.5inch I need to know if I car remove the existing inner bearing/raceway and seal and replace them with the 1.750 25580 bearing and whatever size raceway is required Thanks
asked by: Greg V
Expert Reply:
If you have a number 42 spindle your spindle should be 1.74 inches where the outer bearing rides and 1.25 inches where the inner bearing rides.
I would recommend you take some measurements on the spindle you have to verify what you have so that we can pick you out the correct hub because it doesn't sound like you have a 42 spindle.
It sounds like you might have a BTR spindle which has a grease seal diameter of 1.5 inches (easily confusable with inner bearing diameter, inner bearing of 1.06 inches and an inner bearing of 1.00 inches.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Replacement Trailer Hub Bearing - 15123
- Article: Most Popular Wheel Bearings
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: How Thick Are Electric Brake Shoe Pads and When Should They be Replaced
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Tire Sizing
- Q&A: Common Torque Specifications for Lug Nut Size
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Q&A: Trailer Hub Replacement for 2021 Grand Design Reflection 5th Wheel with 5,200 lb Axle
- Q&A: Brake Kit for Forest River Sandpiper 3440BH With 6,000 Pound Axles
- Q&A: Length of Wheel Studs on Dexter Trailer Hub # K08-201-9B