Installing a LED Light Kit on a 2011 Acura MDX
Question:
Hi there I saw the video on how to set the light kit up, but did not see the other end where it connects to the vehicle. Can you tell me how I can plug it in directly to my Acuras OEM trail hitch plug or do I need to buy another module to confer the plug? Please let me know if I can provide additional info for you. Technically unsavvy in this. Thank you.
asked by: Randy L
Expert Reply:
No worries and thanks for entrusting etrailer!
To power the lights # 98174LED, you will need a 4-Way wiring harness on the vehicle. If you need one, use T-One harness # 118424. It plugs directly into existing wiring. The connection point or plug in connector is located in the rear cargo area. I included an instruction link showing you the step by step directions.
If you need a 4-way to 7-way adapter (if you already have a 7-way on your MDX) then the Tow Ready # 30717 will suffice.
I recommend using dielectric grease like # 11755 to keep moisture out of the electrical connections.
I also included a couple videos for you to view prior to your installation.
![Chris B](https://images.etrailer.com/static/images/catg/people/678_tn.jpg)
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 7 Round - Blade
- Tow Ready
more information >
Product Page this Question was Asked From
LED Light Kit for Draw-Tite, Tow Ready, Pro Series, and Rola Railed Cargo Carriers
- Accessories and Parts
- Hitch Cargo Carrier
- Flat Carrier Parts
- Lights
- Light Kit
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Wet Shackle Bolts to Reduce Noise from Tandem Axle Travel Trailer Suspension
- Q&A: 2" Trailer Hitch Receiver For Carrying A Cargo Carrier Behind a 2017 Honda HR-V
- Q&A: Do the Colors of Trailer Brake Magnets Mean Anything
- Q&A: Checking Electric Trailer Brake Magnets for Wear, Shorts, Amperage, and Resistance
- Q&A: Why Would New Trailer Brakes Feel Weak After Axle Replace
- Q&A: What Colors are Trailer Brake Magnets Wires
- Q&A: Replacement Trailer Axle Recommendation for a 4 by 8 Utility Trailer
- Article: Basics of Tie Down Straps
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rooftop Cargo Carriers
- Article: Overview of Lubricating Grease
- Article: 7 Common Questions Everyone Has About Trailer Tires