Will P3 Brake Controller # 90195 Work For Triple Axle Trailer with Electric Over Hydraulic Brakes

Question:

I have a - 1000 PSI, Carlisle Hydrastar-1600 Elec/Hydraulic - Brake Actuator on my three axle trailer disc brakes with 14000gvwr when loaded would the p3 work on this setup and do you also have quick connect wiring for a 2005 350 super diesel xlt

asked by: Philip D

Expert Reply:

The Tekonsha Prodigy P3 Trailer Brake Controller, # 90195, can be used for trailers with up to 4 axles and is for use with electric or electric-over-hydraulic trailer brakes so this brake controller will work for you.

As long as your 2005 Ford F-350 is equipped with a 7-way you will just need the Tekonsha Plug-In Wiring Adapter, # 3065-P, to get things wired up and ready to go. Super quick and easy installation, one end of the adapter plugs into the built-in port beneath the dash and the other plugs into the brake controller.

If your truck is equipped with a 4-way connector you will need Wiring Adapter, # 37185, in addition to the adapter.

I have attached an article on brake controller installation for your Ford Super Duty truck.

expert reply by: Leah S