Recommended Class II Ball Mount for 2012 Kia Sorento w/ Dealer Installed Hitch

Question:

2012 kia sorento v-6. Had factory hitch installed by dealer. Please recommend a hitchball/drawbar mount for this vehicle. I was looking at the curt part # c45572. Also this is a class II hitch and I would like a 3500lb rating. Thanks

asked by: Ron

Helpful Expert Reply:

The correct ball mount for your needs will depend on the height of your trailer coupler and the diameter of trailer ball you need.

You'll want to choose a ball mount that will place the trailer ball at the correct height so that your trailer is towed level. I'll link you to an FAQ article that shows how to measure the height of the receiver and the height of the coupler. The difference between these two measurements is the rise or drop you'll need. A ball mount that would make things exactly level isn't always available, but as long as you're within 1-1/2 inches of level, you'll be fine.

The Curt # C45572 you referred to has a rise of 2-5/8 inches, and provides a 2 inch ball. If this will put you within 1-1/2 inches of level, and your trailer uses a 2 inch ball, this ball mount would be a great choice for you.

I've linked you to our selection of Class II ball mounts with a 3500 lb capacity.

expert reply by: Mike L