Recommended Weight Distribution Head Assembly Replacement
Question:
Whats the tongue weight for this receiver? I have a similar model made by husky, and my receivers head assembly bent around the ball because i was overweight. I need the strongest one available, i believe they make one with tongue weight of 1200lbs, tow weight of 12,000.
asked by: David
Expert Reply:
Thanks for providing a picture and the head assembly is certainly bent as you referenced.
The Pro Series bolt-together round bar head # PS58442 you referenced will fit your shank, but probably wont fit your Husky spring bar system because they aren't interchangeable.
Since you are wanting a system with a 12,000 pound tow rating, I recommend going with an entirely new weight distribution setup. With that said, I recommend the Reese Steadi-Flex with sway control trunnion system # RP66560. The gross towing weight is 12,000 pounds and tongue weight between 600-1200 pounds). A trunnion bar system is more rugged and heavy duty than round bar systems.
Please note, to choose a properly tuned weight distribution system for your trailer you will need to go by the total effective tongue weight of the set up. This is calculated by taking the measured tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. Please refer to the linked article.
I included a helpful article and video reviews for you as well.
Products Referenced in This Question
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 12K GTW, 1.2K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Replacement Weight Distribution Bolt-Together Round Bar Head
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Round Bar
- Pro Series
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Solution for Needing Replacement Reese Weight Distribution Shank
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Pro Series Weight Distribution Head for Round Bar System
- Q&A: Replacement Head for Weight Distribution System
- Article: Determining Trailer Tongue Weight
- Q&A: Replacement Shank for Weight Distribution System Needing More Height
- Q&A: Is 8 inches From Bottom of Weight Distribution System to Ground Enough Clearance
- Q&A: Recommended Weight Distribution With Sway Control For Triple Axle Trailer With 18,000-Lb GTW
- Q&A: Best Weight Distribution System for Towing a 28 ATC Aluminum Trailer with a 2017 Ford F-350
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Troubleshooting Brake Controller Installations
- Article: How to Measure for Trailer Hitch Drop