Troubleshooting Trailer Running Lights that Arent Working
Question:
I just installed led taillights on my boat trailer. Everything works except running lights. Any suggestions?
asked by: Jeff E
Expert Reply:
The first step to troubleshoot your problem would be to determine if the wiring problem exists with the vehicle or the trailer. Turn on the vehicle headlights, and use a circuit tester like part # PTW2993 on the pin on the trailer connector that feeds the running light circuit. If your vehicle has a 4-pole connector, test the pin being fed by the brown wire. If you are dealing with a 7-way connector, you would test the pin in the 11:00 position.
If the tester indicates voltage on the pin you are testing, the problem is with the trailer wiring. Start with the connector on the trailer. Make sure it is not damaged or corroded. 4-pole connectors are known for having the wire insulation crack right behind the connector after a few years. Once the insulation cracks, moisture can cause the copper conductor to corrode, and current will not pass through.
Trace the running lamp circuit back from the connector (usually a brown wire). Look for cracked or worn insulation. Make sure all connections at each marker light are tight, and that each lamp is bolted directly to clean metal. If each lamp has a separate ground lead, make sure those are securely connected to metal on the trailer frame.
If you are not getting a signal on the running lamp pin, how to proceed will depend on the year, make and model of the vehicle, as well as the type of trailer connector on the vehicle and if the vehicle is equipped with the factory tow package.
If you would respond with that information, I can provide more specifics.
Products Referenced in This Question
Product Page this Question was Asked From
Continue Researching
- Q&A: Recommended Trailer Wiring and Brake Controller for 2010 Toyota Sienna
- Q&A: Troubleshooting Trailer Lights Not Working with Hopkins 4-Way/7-Way Adapter on 2006 Toyota Sienna
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Test Brake Controller without Trailer Connected
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated