Is There a Weight Capacity for the Manual Pull-Out Steps For RVs, part # SMFP-4400

Question

Question:

What is the weight rating on these steps?

asked by: Kenneth M

0

Expert Reply:

I called my contact at Lippert about the Manual Pull-Out Steps For RVs, part # SMFP-4400 they said the capacity is 300 lbs.

expert reply by: Jameson C

0

Answer 1

Hickory Springs does offer a 4 step model of their RV pull out steps with the part #SMFP-4400. These have the same dimensions as the triple step as well as same step design so it's exactly what you are wanting.

view full answer...

Answer 2

Manual RV steps #SMFP-4400 could work for you. This is a 4-step unit that is 28-1/8 inches wide overall and 12 inches deep (front to back) and 18-1/2 inches tall. None of the other 4-step options are as close in the measurements of what you have now.…

view full answer...

Answer 3

That is hard to say, but what you can do is check out the dimensional picture I attached for the Flexco Steps part #SMFP-4400 and compare them to what you have to see how they would compare to what you currently have.

view full answer...

Answer 4

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 5

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 6

Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…

view full answer...

Answer 7

Are measurements are not like lumber measurements that round up. If the overall width of your existing steps is 27-1/2 inches then the Manual Pull-Out Steps #953240RFALC1 are going to be the best option.

view full answer...

Answer 8

I reached out to my contact at Blue Ox and he said that there are no rebuild kits that are compatible with your older Aventa BX7330 tow bar. If your tow bar is starting to under-perform then it is time to replace it. If you would like to stay with…

view full answer...

Answer 9

Your G6A-7 is an Atwood water heater with a 1/2" drain plug. If you have aluminum threads I recommend the Camco RV Water Heater Anode Rod w/ Drain - 1/2" Diameter x 4-1/2" Long Item #CAM11533. This is an aluminum plug with an anode rod…

view full answer...

Answer 10

We certainly have base plate kits available for your 2016 Ford F-150 that will hook right up to your existing Sterling All Terrain Tow Bar #RM-576, but they will all require that you first remove the Ranch Grill Guard that you have mounted. This will…

view full answer...

Answer 11

I have another option, But you are correct that the Aries Pro Series Grille Guard with Mesh LED Cover Plate #AAP1053, and Blue Ox Base Plate Kit #BX1139 will not both be able to be installed on your 2021 Jeep Wrangler as they both mount to the frame…

view full answer...

Answer 12

To install the Replacement I-Beam Jack Bracket #LC349975 for Lippert Ground Control 3.0 #LC358590 you'll need to follow the instructions that came with the Lippert Ground Control 3.0. I've attached a cutout from the instructions for the…

view full answer...

Is There a Weight Capacity for the Manual Pull-Out Steps For RVs, part # SMFP-4400

Product Page this Question was Asked From

Continue Researching