Electric Brake install 2000 Coleman Sedona

Question:

I've confirmed my bearings are 44643 for inner and outer. Ive also got the 5 on 4-1/2. So I would like a list of parts for the Electric Brakes for the 2000lb Dexter Axle. Ill need the Hub/Drum. Could you include Wiring in this as well for a 10 ft box. There is wiring there but not sure if its good after being coiled up and unhooked for 15 years under the trailer. Ive read where some people indicate the necessary bolts/washers dont come to be able to bolt down the Electric brake. Can you include that as well. Just making sure I have everything right from the start. Thanks again. I wasnt sure how to reply to your reply so Ive just answered your questions with the same subject line.

asked by: Jeff K

Expert Reply:

Are you certain of the bearing number? Is there a possibility it could be L44649, and not L44643?

We don't offer a hub/drum that's compatible with the L44643, only idler hubs. The only alternative I can see would be to replace your existing axle for one that uses spindles compatible with the bearings that brake hub/drums use.

We offer some 'off the shelf' axle options. If you'd care to reply with the hub face to hub face and spring center to spring center dimensions, I'd be happy to check to see if any of our stock axles would be compatible.

expert reply by: Mike L