Roller Recommendation for Guiding a 2 inch Wide Strap on Boat Trailer
Question:
I need a 2-1/2inch OD roller to fit between existing trailer frame for guiding 2inch strap to eye on boat. I will use a bolt to mount roller between frame. Can you provide this item? What size bolt would I need to mount roller? Please advise ASAP.
asked by: Evan H
Expert Reply:
The best roller for your needs would be the # YR5203-4P this has an overall length of 5 inches so it would work well for a 2 inch wide strap to roll on the inner part of it. The overall diameter of the roller is 3 inches which is pretty close to what you need. It's designed to roll on a 1/2 inch shaft like part # CE10701A.
For a bracket you could use the panel bracket part # CE10301G or the angle brackets part # CE10211G.
Check out the review video I attached.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair
- Boat Trailer Parts
- Rollers
- Side Angle Bracket
- Galvanized Steel
- CE Smith
more information >
CE Smith Panel Bracket for 5" Boat Trailer Rollers - Galvanized Steel
- Boat Trailer Parts
- Rollers
- Roller Bracket
- Galvanized Steel
- CE Smith
more information >
Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 6-1/4" x 1/2"
- Boat Trailer Parts
- Rollers
- Roller Shafts
- 1/2 Inch Diameter
- Zinc-Plated Steel
- 6-1/4 Inch Long
- CE Smith
more information >
Yates Spool Roller for Boat Trailers - Heavy-Duty Rubber - 5" Long - 1/2" Shaft
- Boat Trailer Parts
- Rollers
- Spool Roller
- 3 Inch Diameter
- Black Rubber
- 5 Inch Long
- Fits 1/2 Inch Shaft
- Yates Rubber
more information >
Product Page this Question was Asked From
Boat Trailer 4" Long Spool Roller by Dutton-Lainson
- Boat Trailer Parts
- Rollers
- Spool Roller
- Black Rubber
- 4 Inch Long
- Fits 5/8 Inch Shaft
- Dutton-Lainson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 6-1/4" x 1/2"
- Shop: CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair
- Shop: Yates Spool Roller for Boat Trailers - Heavy-Duty Rubber - 5" Long - 1/2" Shaft
- Q&A: Availability Of a 12 x 4 Inch Wheel With 4 Lug Bolt Pattern and 5.30-12 Inch Trailer Tire
- Q&A: Can a 145R12 Tire Replace a 4.80x12 Bias Trailer Tire Size
- Q&A: Can the 4" Roller on the CE Smith Keel Roller Assembly Be Replaced and Secured Using a Nut and Bolt
- Q&A: Replacing Shelby 5403 Winch on Boat Trailer
- Q&A: Does Kenda Karrier ST145/R12 Trailer Tire & 12 Inch Black Mod Wheel AM35354 Come Balanced
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Measure for Correct Bearing Buddy Size
- Q&A: Does Dutton-Lainson 4-Inch Boat Trailer Spool Roller DL21566 Contain Metal
- Article: Trailer Jacks