Replacement Bearing Recommendations for a Trailer that has Number 84 Spindles
Question:
I am looking for bearings for my motorcycle trailer and it looks like it has some odd measurements and I wondered if you could help. here are the measurements I got with a digital caliper and verified with my micrometers. inner bearing ID 1.373 inner race OD 2.361 can not read the numbers on race or bearing but they are made in hungary outer bearing ID 1.060 outer race OD 1.980 race is L44610 Bearing is L44649 Seal OD 2.550inch ID 1.750 Any help you could give would be appreciated.
asked by: Brian T
Expert Reply:
It sounds like you have a number 84 spindle installed on your trailer axle based on the inner diameters you listed for the bearings you have.
Which the correct replacement bearings for this spindle would be the part # L44649 and part # L68149. This matches the race numbers you referenced as well.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Wiring Diagrams
- Article: Car Camping Checklist
- Q&A: Repair Kit Availability for a 5125 Valley Coupler
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes