Will a Vehicle Heater Work With a 2012 Mazda 3 2.0 SkyActiv Engine
Question:
Will this product work with the newer Mazda 3 with the SkyActiv engine? This is a 2.0L engine. Also, how well are the install instructions written? Is there much coolant loss during the install?
asked by: Frank
Helpful Expert Reply:
Yes, the Kat heater # KH11409 will work on your 2012 Mazda 3 SkyActiv as I called our representative at Kat's to confirm. You will install it in the rear of the engine block.
The instructions are written well but installation by a certified mechanic is recommended. See picture I included.
Coolant will need to be drained prior to installation and replaced once complete.
It's recommended, once your heater is installed, to have your local service station check your anti-freeze solution. On permanent type anti-freeze, a solution too strong or too weak will freeze. If it freezes, it will stop the flow of liquid through the heater and hoses and cause the heater to burn out.
Another installation note is the heater # KH11409 must be installed and submerged into coolant before energizing. If not, the element can burn out in seconds. Use a 50/50 solution of antifreeze and distilled water as well.
![Chris B](https://images.etrailer.com/static/images/catg/people/678_tn.jpg)
Product Page this Question was Asked From
Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 400 Watts - 3/4" NPT
- Vehicle Heaters
- Engine Block Heater
- Frost Plug Style
- 400 Watts
- CSA Approved
- Kats Heaters
more information >
Continue Researching
- Q&A: Where to Install Kat's Custom Engine Block Heater on 2015 Mazda CX-5
- Shop: Vehicle Engine Heaters
- Shop: Trailer Wiring
- Shop: Kat's Heaters Plug Cover for Power Cords with 3-Prong Plugs
- Shop: Kat's Heaters Oil and Coolant Immersion Heater - 120V - 150 Watt - 25 mm NPT
- Shop: Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 400 Watts - 3/4" NPT
- Shop: Kat's Heaters Engine Oil Dipstick Heater
- Video: Choosing the Right Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Search Results: hitch
- Shop: Brake Controller
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: Gooseneck Hitch
- Article: Rooftop Cargo Carriers
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Fifth Wheel Hitch
- Article: Stability Control for Heavy Duty Vehicles
- Article: Performance Chips and Modules
- Shop: Suspension Enhancement
- Article: Trailer Tire Sizing
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can 14.5 Inch Wheels Be Easily Changed Out to 15 Inch Standard Wheels
- Q&A: Block Heater that Fits 2023 Mazda CX-9 and Where it Installs
- Q&A: Is Any Grease Needed When Installing Kat's Block Heater in Vehicle
- Q&A: Where is the Port for the Block Heater # KH11815 on a 2018 Ford F-150 with a 3.5L V6 EcoBoost Engine
- Q&A: Kats Block Heater for Mazda 3 2012 Skyactiv