Parts Needed to Flat Tow a 2012 Toyota Tacoma with Roadmaster Stowmaster Tow Bar  

Question:

Helpful Expert Reply:

Yes, there is some drilling required to install base plates # 1175-3 on your 2012 Toyota Tacoma. I have included a link to the installation instructions to the right for you to view. These base plates are NOT compatible with the Roadmaster Stowmaster tow bar # RM-501.

I recommend using the XL base plates # 1175-1. There is still drilling required but these base plates are compatible with the Stowmaster tow bar.

You will also need safety cables # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use a magnetic kit such as # RM-2120 or a more permanent solution such as 6-diode kit # 154-792-118158.

And finally, most states now require supplemental braking on the vehicle being flat towed. I recommend the SMI Stay-In-Play Duo, # SM99251. It is a proportional system that applies the vehicle brakes in proportion to how much the motorhome is braking. This is the safest way to stop and reduces wear and tear on both vehicles.

Be sure to consult your Tacoma owners manual for specific information on flat towing the vehicle. I have also included some helpful links to our series of help articles on flat towing for you.

expert reply by: Michael H

1