Titan Chain Screw Pin D-Shackle - Galvanized - 3/8" Diameter - Qty 1
(3 reviews)
Price: $2.94
In Stock
Titan Chain Screw Pin D-Shackle - Galvanized - 3/8" Diameter - Qty 1
Item # TCS10MM
Our Price: $2.94
In Stock
- All Info
- Reviews (3)
- Q & A (0)
- Videos (1)
- Photos
Titan Chain Tow Shackles - TCS10MM
- Shackle Only
- Screw On
- Titan Chain
- Chrome
- Steel
D-Shackle serves as a connection point for 2 pieces of rigging equipment for applications with in-line loads. Constructed of galvanized, low-carbon steel. Screw pin allows for quick securement.
Features:
- D-Shackle serves as a connection point for 2 pieces of rigging equipment
- Use for in-line loads
- Great for industrial and agricultural applications
- Galvanized low-carbon steel construction resists corrosion
- Screw pin allows for quick connection and disconnection
Specs:
- Pin diameter: 3/8" (10 mm)
- Quantity: 1 shackle with 1 pin
- 30-Day limited warranty
S10MM Titan Chain Screw Pin D-Shackle - Galvanized Steel - 3/8" Diameter - Qty 1
Video of Titan Chain Screw Pin D-Shackle - Galvanized - 3/8" Diameter - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Titan Chain Electric Winch TCS10MM Review
Speaker 1: Today, we're going to be taking a look at the Titan Chain Screw Pin D Shackle. This is going to be a really easy to use D shackle. It's going to allow you to connect two pieces of rigging equipment. It's going to be great for inline loads or industrial agriculture applications. You just have this little pin here that's going to go through one end and thread into the other side. Only one end is threaded, so keep that in mind.
It only goes one way.It is made of a galvanized low-carbon steel. It's going to resist corrosion, but still be nice and durable. As far as the dimensions on this, the pin diameter is going to be three-eighths of an inch, or 10 millimeters. The overall length is going to be about two and one-half inches by about an inch and one-half there, to the end of that pin. For the flange, it's about two inches and one-quarter.That's going to do it for our look at the Titan Chain Screw Pin D Shackle..
Customer Reviews
Titan Chain Screw Pin D-Shackle - Galvanized - 3/8" Diameter - Qty 1 - TCS10MM
Average Customer Rating: 4.7 out of 5 stars (3 Customer Reviews)
D-Shackle serves as a connection point for 2 pieces of rigging equipment for applications with in-line loads. Constructed of galvanized, low-carbon steel. Screw pin allows for quick securement.by: RichardG09/17/2022
I got these to better gauge if a 3/8" diameter D-shackle is what I needed for the application...if so, I would use it, if not I would get the right size...sometimes its hard to know what size will do the job...I do recommend them...
by: Paul 09/03/2021
I used these on my safety chains, worked perfectly.
by: ARTHUR08/05/2020
Still in use !!!
3
3
See what our Experts say about this Titan Chain Tow Shackles
- Width and Working Load Limit of Titan Chain 10mm Screw Pin D-ShackleIn regards to the Titan Chain Screw Pin D-Shackle part # TCS10MM, the distance from the pin to the inside edge opposite of this is going to be around 2". I spoke with Titan and they informed me that the working load limit (WLL) is 880 lbs.
view full answer...
Info for this part was:
Edited by:
Lindsey S
Installed by:
Kathleen M
Written by:
Brian T
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.