Alpena LEDLitz - 28" Red Exterior Flexible Lights

Video Transcript for Alpena Vehicle Lights - Tailgate Bar - ALP77016 Review

Today we're going to be taking a look at part number ALP77016. These are going to be your Flexible LED Light Strips. You're going to get two strips, each strip is going to measure about 14 inches long. Each strip is going to have its own wiring, it's going to contain a 2-wire design per light strip, making it very easy to install on 12 volts systems. It's going to feature the edge mounted LEDs for nice custom installs. Allows you to get into nice tight spaces, very sleek low profile design.

These are going to work great as light strips for a headlights, mirrors, taillights, and other areas on the vehicle. It can be use for interior and exterior applications. That's got a nice water resistant design, and it's very flexible so it allows them to contour to curve surfaces. Allowing for really nice, custom and creative install. Here on the back side, we're going to have the 3M self-adhesive tape. Simply just pull that backing off and just take it to your surface.

The strips can be cut to size, all along the light strip we're going to have predetermined points that are marked by the small scissor icon, so if you do cut it you want to cut where that small scissor icon is located on the strip. Again, very easy to install on 12 volt systems. The wiring's going to measure about 38 inches long so it's going to give you a pretty descent length of wiring to work with. We're going to go ahead and turn off our overhead lights and turn on the light strips so you can see what it looks like with power running to it. You can see here, these light strips are very bright. They're very powerful.

Then each strip we can count the LEDs real quick. We got 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18. Each strip is going to contain 18 LEDs or 18 diodes sending out a nice strong bright consistent LED signal. That's going to do it for today's look at part number ALP77016.