Access Toolbox Edition Soft, Roll-Up Tonneau Cover
(95 reviews)
Price: $564.40
Access Toolbox Edition Soft, Roll-Up Tonneau Cover
Item # A93VR
Retail:$664.00
Our Price: $564.40
You Save: $99.60
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (95)
- Q & A (0)
- Videos (1)
- Photos
Access Tonneau Covers - A93VR
- Roll-Up - Soft
- Standard Profile - Inside Bed Rails
- Access
- Rack Compatible
- Tool Box Compatible
- Vinyl
- Vinyl Grain
- Opens at Tailgate
This tonneau cover sits behind your 19" - 21" truck-bed toolbox. It features the XT-Dial, AutoLatch, and Access Slantback design - plus a tight seal between the toolbox and cover. Sits 1-1/2" above your vehicle's bed.
Features:
- Custom-designed tonneau cover installs behind your toolbox to protect your vehicle's bed and your gear
- Fits behind most 19" - 21" wide, over-the-rail toolboxes
- Sits 1-1/2" above truck box when closed
- Slantback design gives your truck a stylish look
- Aerodynamic cover reduces wind drag, improving gas mileage by up to 10 percent
- Soft cover rolls up in seconds to allow full use of your bed
- Peels back off the hook-and-loop seal on sides of truck box
- Stores neatly behind your toolbox with premium straps and clips
- Truck bed is secure when cover is down and tailgate is locked (tailgate lock sold separately)
- Deluxe AutoLatch II automatically engages 2 locks when the cover is closed
- One-hand release makes opening the cover quick and easy
- Durable, UV-resistant vinyl retains its shape and won't fade
- Easy-to-grip XT-Dial lets you adjust tension and fit at the turn of a dial - no tools required
- Front header bar and Element weather seal behind the toolbox and a reinforced vinyl flap at the tailgate
- Help to block rain, snow and dirt from getting into your truck bed
- Contoured, black powder coated aluminum rails and bows resist rust
- Truck tailgate and toolbox remain operational even when cover is closed
- Aircraft-grade aluminum clamps secure tonneau cover rails inside truck-bed rails
- Leaves side rails free for stake pocket and bed rail accessories
- Includes 6 clamps for short-bed trucks or 8 clamps for long-bed trucks, depending on your application
- 5-Year limited warranty
- Made in the USA
The Toolbox tonneau cover from Access is specially designed to fit a truck bed with a toolbox. This truck-bed cover rolls up so that you can haul bulky items or rolls down to shield and secure your vehicle's bed and cargo. The tonneau works with most over-the-rail toolboxes that are 19" to 21" wide - and open or closed, the cover won't interfere with use of your toolbox. The custom-fit cover sits 1-1/2" above your truck bed and keeps air from getting caught by the tailgate, thus reducing drag. That can improve your gas mileage by up to 10 percent. And the exclusive Access Slantback fit angles toward your tailgate to give your truck a stylish, streamlined look.
Velcro closures on the sides help seal the cover to your truck box and allow you to peel it back quickly for loading. The tonneau stores neatly behind your toolbox, secured by premium storage straps that are designed to keep your cover from rubbing against the toolbox.
The cover is constructed of double coated, reinforced UV-blocking vinyl, so it won't fade in the hot sun. The material stays flexible down to -40 F and won't shrink, regardless of the temperature. Black powder coated aluminum bows act as ribbing to support your cover and make it easy to roll up.
Customize the cover tension by turning the XT-Dial easy-grip tension adjuster at the front of the cover, near your toolbox. The special header bar forms a tight barrier between the cover and your toolbox to keep out dirt, rain, snow and ice. The Element weather seal at the toolbox and a reinforced vinyl flap at the tailgate also help to keep out the elements.
The contoured, black powder coated aluminum tonneau rails resist rust. They sit inside your truck-bed rails so that you can still use stake-pocket-mounted accessories, such as ladder racks and tie-down anchors. Easily install the rails on a truck with an under-the-rail, drop-in bed liner. Over-the-rail liners can be cut to allow room for the installation clamps. The tonneau's rails attach easily to your truck-bed side rails using Tight Bite clamps. The specially designed teeth on these clamps seize the integrated ridges in the rails, ensuring a firm grip.
Once the tonneau cover is unrolled and in place, the AutoLatch II dual locking system automatically engages 2 locks - 1 on each side - to hold the tonneau closed. And locking the cover won't interfere with your tailgate - open and close it as usual or add a tailgate lock (sold separately) to get secure storage for your cargo. To unlatch the cover, simply pull the cord for easy, one-hand operation. Cover your assets with this tonneau from Access.
64279 Agri-Cover Inc. (ACI) Tool Box Rollup Truck Bed Cover - Crossover-Style Toolboxes
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2024 Ram 3500 8 Foot Bed
California residents: click here
Video of Access Toolbox Edition Soft, Roll-Up Tonneau Cover
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Access Toolbox Edition Soft Roll-Up Tonneau Cover Review
Adam: What's going on everybody Adam here with etrailer. Today, we're going to be taking a look at the Access Toolbox Edition Soft, Roll-Up Tonneau Cover. Line of Access Tonneau Covers is going to be able to fit a wide variety of different trucks, use the etrailer fit guide to put in your year, make and model of your truck to find the exact fit for your truck bed with toolbox.You all know the many benefits to having a tonneau cover, yes, it's going to protect all the contents from all that rain and snow that you may have, also it's going to increase your fuel economy. But also the main thing for me is just to protect anything from theft, because people just have sticky fingers, but sometimes you really don't have the option, you have both a toolbox and a tunnel cover. Sometimes you really just have to pick one or the other. Well, this is the main benefit to having this tonneau cover.
We can have the lock box here, have all our tools and stuff in there and have all of our fun recreational stuff in here. And since we have a locking tailgate, everything is nice and secure.It is a very durable vinyl material and it is going to resist against the sun and all of the elements that mother nature's going to throw at it. And it's going to keep all of that water out too. And it is pretty low profile as well with the toolbox, we're losing a little bit of the rail space, but with the tonneau cover, we're not. So if you're like me and you like to talk after maybe around a golf or maybe after a long day at work, but you still have these rails to sit and relax.The Access Tonneau Cover gives you quick and easy access because all you got to do is just grab this little string here, pull that down, one hand, that's all you got to do.
And then you can go ahead and roll all this up, just like that. So you can go ahead and if you're going on a trip and you want to keep your bed open, whether you have contents in there or you just like it better that way, we have these little straps and they're just going to click right at the back of the cover on both sides and we can adjust this. I can actually roll it over one more time, maybe we can go ahead and tighten this up. It's going to hold this back on here and just grab this and bring it forward. Nice and tight.
Just like that.With the tonneau cover rolled up, we can get a closer look at our rails. So these are going to be made of an aerospace grade aluminum. So they're not going to rust away over time. And even the clamps are made of this aerospace grade aluminum, which is great. So they're not going to rust.
It's going to be easy to take on and off if you need to, but it looks good. So you don't really have to. And we do have a powder-coated finish too. So it gives a nice little look, blends in with the side rail colors on our Silverado.If you're tired of having to choose between a tonneau cover or a toolbox, etrailer has got a solution for you, the Access Tonneau Cover, it works just as well as any other soft, roll-up tonneau cover, but it just makes your truck to be able to do more. And that's something I like because trucks are made for working. And it also looks really good too.And that just about does it for our look at the Access Toolbox Edition Soft, Roll-Up Tonneau Cover. And I'm Adam with etrailer.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- etrailer mistake
Customer Reviews
Access Toolbox Edition Soft, Roll-Up Tonneau Cover - A93VR
Average Customer Rating: 4.6 out of 5 stars (95 Customer Reviews)
This tonneau cover sits behind your 19" - 21" truck-bed toolbox. It features the XT-Dial, AutoLatch, and Access Slantback design - plus a tight seal between the toolbox and cover. Sits 1-1/2" above your vehicle's bed.by: Don12/28/2023
The cover works fine, however the attachment devices that it came with it do not. They continue to come loose and fall off. Finally had to drill the cover into the sides of the truck and the truck box. Now it stays in place.
by: Gary 12/03/2022
It was easy to install and works great. I believe this is the only way to keep the bed coved when you have a toolbox and need to be able to pull a 5th wheel.
by: Ken11/30/2021
Tonneau cover is great, although the spacer between the cover and tool box needs better design. The 3 inch filler panel has clamp points on both sides which don't work very well, always sits lower than the cover, hard to attach and allows a lot of water to access the bed. If the filler panel had attachment points that slides into the cover panel for looks, stability, water control and installment it would work much better.
by: Richard 08/21/2022
Excellent quality, very good installation kit and instructions. It fit perfectly in the bed and sealed against the toolbox. Also included rubber seal for the front of the toolbox to make weather tight seal to front of truck bed.
by: Jonathan06/26/2022
Cover came highly recommended by RVers for large fifth wheel applications. However, Ram 3500 dually with Andersen hitch combination doesn’t work. Cover rails are to high and makes contact with the RV. The tonneau cover itself is nice.
by: Rick 02/01/2021
Great product and service from etrailer. Only improvement could be better directions. I’m a stickler and admirer of good directions. The instructions for the cover were not as easy as they could be. Otherwise great product.
by: Jacob 04/12/2023
Love it and would definitely recommend.
by: Ken01/27/2023
We travel a lot with our RV and frequently keep stuff in the back of the truck. I wanted something to hide it all. This cover is excellent. It looks fantastic and is easy to use (roll/unroll). Installation was okay but two sets of hands or clamps make it a lot easier. The instructions are just okay but it all worked out. The cover was a smidge short so I had to double-up on the rubber seal at the tailgate. No biggie. Also, no need to have a separate cover for my 5th wheel hitch. Very happy!
by: Chester04/16/2024
2015 GMC 8'Body.Great to have a cover compatible with a toolbox. I can keep items secure and out of sight. Looks great on the truck.
by: Anna 04/13/2024
We love this tonneau cover! This is our third purchase of the same cover. We upgraded to a 2024 Dodge Ram and unfortunately needed the new fit. This is easy to install and wears extremely well. Our old tonneau cover purchased 3 years ago looks literally brand new. I am grateful that this company makes an affordable solution to covering the bed of your pickup and allowing for a toolbox as well.
by: Lamar F09/29/2023
I've been looking for years for a cover to fit my bed with the toolbox and all I ever heard was they don't make them. I love this cover and thanks etrailer. I was a little confused with the instructions provide, so it was a combination between the video and instructions that helped me complete the task. I really recommend if your in the market for this kind of tonneau cover.
by: Tom 03/31/2024
Cover fit well and is made of durable materials. Installation instructions were good and trailer how to videos a plus
by: Rene11/15/2023
The cover itself is ok, soft vinyl. However the mechanism that attaches to the frame is a very bad design. The adjustment screw continues to fall out and the cover comes up, by the tool box. I fixed the design by add two bolts and lock nuts and it seems to be fine.
by: Matt W.07/06/2013
Installed on a 2013 F150 with 6-1/2' foot bed. I had already installed a toolbox across the bed rails and then decided to add an Access cover since I knew I could get this tool box compatible version. I had an Access cover on a previous truck and knew I wanted the same brand again.
Plan on buying additional bulb weather stripping as the cap between the tool box and the front of the bed is wide depending on tool box width. My gap was wider than what came with the installation kit. You have to put the toolbox exactly where it needs to meet the bed cover header.
Installation was easy for the cover as the struggle was getting the toolbox weather stripping installed. I put the bulb seal in the kit on the front of the toolbox and then added my larger bulb weather stripping onto the front of the truck bed so that both mated up once the toolbox was put back into place per the instructions. Any local parts store should carry the seal material.
I do like how you need to open the tailgate to operate the latching system. If you lock your tailgate, it cannot be accessed. My previous Access cover had a push button you could use to unlatch the cover with the tailgate closed. Not great if you want to keep other out of your truck bed.
by: Austen08/25/2022
Overall, Happy with this product. Relatively easy to install, however, I recommend doing it with a partner to make it easier. Fits great with my Weather Guard toolbox and gives the truck a great look overall! Super easy to open and close and provides way more security than having the bed open for all to see.
by: Dick S12/18/2021
Cover has lived up to expectations. Easy to install. I integrated it with a 5th wheel tool box which conveniently allows separate access to either. Protects my hitch from the elements when I am not towing. Easily rolls up and down. When rolled up, it does not block my rear view when I hitch my 5th wheel. Stays securely fastens when closed. No water intrusion, even in a car wash. Every couple of months I apply a good coating of a quality vinyl UV protectant.
by: Paul09/14/2020
The cover fits well over the truck bed and snug against the tool box. RAM 3500 with 8' bed.
by: Dennis 11/09/2023
Excellent product. Simple installation instructions. Still
Looks brand new. As always, it shipped promptly. Great service as usual.
by: David 07/26/2022
Really happy with the tonneau cover for my 2016 F150. It was a little more difficult to install than I expected, but we finally got on. It works as advertised.
by: George05/04/2022
Love the way this cover looks on my truck . I see why this setup is popular with 5th wheel truck owners. I can hide the hitch from some weather elements and cover up what’s stored in the bed. My next upgrade is a lockable tailgate latch. Only 1-recommendation to the manufacturer is maybe real photos in the instructions to help installation. Other that I’m very pleased and would recommend to everyone.
by: Austin10/17/2020
This cover is a perfect match for a tool box! It comes with everything needed to seal the front of the box and then seals for around the cover. It rolls up and the clips hold it in place as it should. The adjustment knobs make sure you will get the best fit and coverage.
by: Rick 07/29/2022
Works great with my tool box
by: Doug Ader10/06/2023
Directions were somewhat to be desired but after a couple of U-tube videos we got it
by: Mark 03/29/2024
Excellent product
25
95
Show More Reviews
See what our Experts say about this Access Tonneau Covers
- Is There An Access Toolbox Edition Soft Roll-Up Tonneau Cover That Fits A 2022 Ram Dually 3500 I did some research. I checked our fit guide and the manufacturer's fit guide. The Access Toolbox Edition Soft, Roll-Up Tonneau Cover, part # A93VR, will fit your 2022 Ram 3500 Dually with 8' bed. With regard to the narrowing of the truck bed, this is not unusual, and tonneau cover manufacturers will take this into account. I have included a video review link below.
view full answer... - Differences Between Access Toolbox Soft Tonneau Covers # A93VR & # A37FR For 2022 Ram 3500The Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A93VR is designed to fit the youru 2022 Ram 3500 with a 8' dually bed. The Cover # A37FR will only fit an 8' bed with single rear wheels. This is the only difference in these covers is the truck bed they will fit onto.
view full answer... - Compatible Toolbox and Tonneau Cover for 2021 Ram 3500 with 8 BedThe DeeZee Tool Box part # DZ8170B is a crossover style toolbox, it will sit above the bed rails by 5-1/4". The only tonneau cover we have that will work with a crossover style toolbox is the Access Toolbox Edition Soft, Roll-Up Tonneau Cover part # A93VR. In regards to fifth wheel hitch compatibility, this will vary by setup so you will need to measure to ensure there is proper clearance.
view full answer... - Tonneau Cover for 2021 Ram 3500 Long Bed Dually that Can Fit with Tool BoxFor your 2021 Ram 3500 long bed dually the roll up tonneau cover you'd want is the part # A93VR which was designed to fit behind tool boxes like you are wanting as well. But another cool option is the BAKBox part # BAK92201 which fits under a Bak roll up cover like the # BAK39214 which fits your truck.
view full answer... - Will The Access Toolbox Edition Roll-Up Tonneau Fit With Decked Tool Box On 2023 Ram 3500 Long Bed?Unfortunately, I cannot give you a yes or no answer as you will have to measure how the Decked Truck tool box fits on your 2023 Ram 3500. The Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A93VR is designed to fit with a tool box 19-21" deep. While the Decked tool box is 22.3" deep the front edge can overhang the front of the bed up to 2.5" As we do not carry the Decked and have not test fit these on your truck we cannot say if you will have the front overhang the bed 1.3" or more...
view full answer...
Do you have a question about this Tonneau Cover?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Chris R
Updated by:
Matthew S
Written by:
Mark S
Installed by:
Adam E
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
12/6/2021
The installation for this can be a little tricky since toolboxes vary so vastly. The instructions say to ensure that the weather seal spans the length of the header bar and also, for best protection against the elements, use silicone seal at the front of the side rail and header bar along the side of the box. I hope this helps.