Part Numbers: TLT2310,TLT3306
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (3249 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.these fit my '21 toyota tundra perfect. It took a little bit to figure out the instructions but once we got one side, the other side went well. two of us installed front and rear mounts in a little over an hour. I had Torklift on my 2002 tundra and they were very secure for my slide in, that's why I got them again for my new truck.
The rear camper mounts took 10 minutes each to install. The front ones took 22 minutes each. The mounting brackets are well built and designed. It would have been nice if the install instructions we’re online so we could have read them before we received the mounts.
TorkLift frame mounted tie downs are awesome. Just installed them today on the new Tundra and they are impressive. I have used Happijac tie downs in the past and they work and do the job. I wanted something a little beefier and TorkLift is definitely what I was looking for. Fairly straight forward install, takes a little tinkering but the fit is perfect and there is no doubt TorkLift did their homework. Great quality steel and welds look good. Great work TorkLift! Ordering from etrailer is always easy and they seem to have customer service dialed. They have better information on their site than most manufacturers.
This was a perfect fit on my 2017 Tundra. Installation took about 30-45 min per side. The most difficult step was threading some bolts through the frame holes. They hide nice when not in use.
Perfect. Easy install.
I installed these on my 2018 Toyota Tundra myself. As advertised, they fit into existing bolt holes and installation was straightforward. My slide-in camper attached as advertised and the unit has been trouble free through some rough off road travel.
I recommend this item highly and prefer it to my previous camper tie down system.
Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.
Just like the other tie-downs, they work fine.
Install was pretty straight forward, they can only go on one way, They bolt right into position right in the same mounting holes that are used for your rear trailer hitch. An extra bolt is supplied for the 3rd bolt position.
Each side took about 15 minutes.
Very happy with the way it looks and they are easy to access.
Waited a year to buy these. Torque lift true frame mounted truck camper "brackets" I had an unusual truck...Tundra 2015 longbed single cab.(somewhat rare). PERFECT FIT! The amazing part: ordered on tuesday TWO DAYS later there here! Thanks Etrailer, I will buy my next items (fastguns) anchor "binder" kit from etrailer soon . Thank you.
This was a perfect match for my truck (2015 tundra oem hitch). Took 10 minutes to install using two existing bolts and one supplied. I do not like to bolt the camper to the bumper and these are the best option for me. Quality is good and is a secure source to chain my camper to.
Tie-downs work fine, as expected. Now I need to get better attachments!
Missing most of the hardware.
Got them a couple hours ago. already installed. No problems ,they look very strong or over built . good product. I installed them on my 20016 Toyota Tundra double cab, 6 1/2' bed.
You guys are very nice but I haven’t followed up on my back order line you said you would
Very satisfied with the customer service at etrailer....some research had to be done and the .representative came thru..the camper tie downs were what we needed
Great quality and straight-forward inst allation.
These are perfect, easy to use and work well. What I like most is I tighten them down and the stay tight.
Fast shipping, great product.
stronger than I expected. Wow
Top quality product.
Knowledgeable staff, well appreciated.
Hope they look as nice as the fronts. Haven't got them yet.
Quick shipping on half my order. Just like last time.
Ask the Experts about this Truck Camper Tie Downs
Do you have a question about this Truck Camper Tie Downs?
TorkLift Accessories
Fit to this rack on your 2018 Toyota Tundra
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.