I reached out to my contact at Demco and he said that the Kar Kaddy SS #DM9713045 can be assembled by 1 person and that it typically takes about 3-4 hours. If you are a retired auto mechanic then it will likely be on the lower end as you have…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Generally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in…

Yes, you can attach the Spare Tire #DM5968 to your Demco Kar Kaddy SS Tow Dolly #DM9713045. You will need the Spare Tire Mount #DMRKSTM which mounts just behind the trailer jack.

It is possible to replace your 62" long axle with a longer one. Our next size up is going to be a 72" long 2K rated axle like part #e32GR. The axle being 72" across measured from hub-face…

Demco has an interesting way to determine if the Kar Kaddy X #DM9713093 would provide enough ground clearance for a vehicle like your 2006 Mini Cooper to load. You will need to measure from where the front wheel touches the ground on front side of…

According to page 328 of the online version of the owner's manual for your 2019 Buick Enclave you will need to do the following before towing your vehicle with a tow dolly (it states that your Enclave cannot be flat towed): 1.…

You actually do not want the weight of the load on a trailer to balance perfectly on either side of the axle. You want more weight forward so that the trailer doesn't sway. What you'll want is 10-15 percent of…

The toe-in adjustment steps for the #DM9713045 are as follows: 1. Put a mark on each side of the locking clamp on the tie rod. 2. Loosen the locking nuts on each end of the tie rod and then the four bolts on the tie rod locking clamp. 3. Turn the…

There only differences between the Demco Kar Kaddy X Tow Dolly part #DM9713045 and the part 9713094 is that the former is boxed and must be assembled by the end user. The latter is pre-assembled. That said, you cannot ship an assembled unit so the…

When towing a vehicle on a dolly like the part #RM-2050-1 that you referenced you need the steering wheel to be locked so that around corners the dolly fenders don't hit the door or fender of the vehicle. If your steering wheel…

Typically the lights on a vehicle being towed on a dolly don't have to be active, but it is always best to check with local authorities to ensure that you are abiding by the dolly towing laws. With that being said, some people…