Filter Products
Filter Results
$3.90 - $5.05
$3.90 - $5.05
Filter by Application
Videos
for Odor Eliminators
Help Articles
for Odor Eliminators
Expert Answers
for Odor Eliminators
The correct rear sway bar for your 2013 Ford F-350 SRW 4x4 is the Roadmaster part #RM-1139-173-00 that you referenced. This was designed for trucks like yours that do not have the factory sway bar and will do a great job improving the handling and…
view full answer...Yes, the Furrion Vision S #FOS05TASF has the capability of syncing to up to four cameras so you'd be able to add on side marker cameras #FCE48TASL. I've attached a short video below where I'll walk you through the installation…
view full answer...I took a look at the online owner's manual for your 2005 Honda Pilot. It states that this vehicle, if equipped with a transmission cooler and power steering fluid cooler, has a maximum towing capacity of 3,500 pounds for a standard trailer. This…
view full answer...I went out to the warehouse to measure a jack and handle included in the Leveling Scissor Jack Set, #JSC-24. When compressed, the distance from the end of the crank bolt head to the center of the jack (between the two brackets) is 13-7/16 inches.…
view full answer...The stabilizer bar and brackets will be bolted inside the bed and the front anchoring plate will be bolted on between the bed and the cab. If you don't have enough space to get your hand and the plate between them then you'll have to unbolt…
view full answer...I checked with Happijac and the kit you need for your 2011 Ford F-250 is the part #LC182910-182971 for the tie downs and then for the turnbuckles #LC182897. This is a much better setup than a stake pocket attachment for a camper so I would not…
view full answer...The actual weight of the #BWRVK3710 B&W Companion for the 2020+ GM factory puck system is 165 lbs. The head unit weights 75 lbs and the base weighs in at 90 lbs.
view full answer...I think it's by far the better way to inflate the bags as there's really no need (under most circumstances) to have the bags inflated to different PSIs so having one valve that makes sure that they are always inflated to the same pressure is…
view full answer...The 6'10" short bed and 8' bed of 2021 Chevy Silverado 2500 with the factory 5th wheel prep package have the same puck spacing, so you can use the fixed A20, which is the following part: - Curt A20 5th Wheel Trailer Hitch for Chevy/GMC…
view full answer...Though both the Curt A20 #C84FR and Q20 #C57FR that are designed to fit your 2022 GMC Sierra 3500 long bed with the factory pucks are rated for the same weight capacities (20k towing and 5k vertical load), there are a few key differences between them…
view full answer...The difference between the Q20 #C16130 and the A20 #C16140 is the design of the head. The A20 is the newer design that has the more standard dual pivoting head allowing front to back and side to side movement. The Q20 has a spherical axial bearing…
view full answer...While the Reese M5 hitch you asked about is not a fit for your 2021 Chevy Silverado 2500 short bed with the factory puck system, there is a similar fixed 5th wheel that does fit which I recommend, which is made by Curt: - Curt A20 5th Wheel Trailer…
view full answer...