Filter Products
Filter by Type of Mount
$99.15 - $99.15
Videos
for Clevis Hitch
Help Articles
for Clevis Hitch
Expert Answers
for Clevis Hitch
Rick, according to Blue Ox the space between the bolt holes at the end of the Demco Tow Bar Adapter for Blue Ox Base Plates #DM9523041 is 1.63" ( 1 5/8") so it'd be a quarter inch larger, and should work fine for you.
view full answer...The mounting holes are 2 inches on center for the clevis and 3 inches on center for the mount. The clevis and side of the bracket has holes that are 0.64 inch. The top and bottom holes of the mounting bracket are 0.48 inches and the center hole is…
view full answer...The answer to your question will depend on the trailer hitch receiver on your truck. From what I have found, the Rock Tamer mud flaps require minimum 1" of space in order to be able to mount them. I reached out to B&W and the…
view full answer...The diameter of the mounting holes of the #T0897900 are 5/8 inch. We also have this as a kit with the channel and mounting bolts/nuts with part #T1812200.
view full answer...The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches #MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount.…
view full answer...To replace either of the hitch balls that come with the Curt Deep Drop Adjustable 2-Ball Mount #C49NR you need the Curt Dual Ball Attachment #C69NR. The individual hitch balls aren't replaceable so you have the get the platform piece, but you…
view full answer...Definitely! The distance between the tangs on the Gen-Y Clevis #325-GH-039 is exactly 1.95" when measured with calipers. I went ahead and attached a diagram of this measurement for your convenience. For a hitch pin to secure the clevis to your…
view full answer...The distance between the tangs on Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle #AMCC2 is 2 inches. I've attached a link to a video review of this product for you to take a look at.
view full answer...That is a pretty good guess! The two position mounting channel in the #T1812200 is 3-1/2" wide x 7-1/2" tall as shown in the included diagram. I included a video review of the #T1812200 for you to take a look at.
view full answer...I recommend using the Redarc Tow-Pro Elite Brake Controller #RED63RR with your 2022 Jeep Gladiator. You will use the Plug and Play Harness #3073-P to connect to the tow package factory wiring on your Jeep. I prefer the Redarc as it hides the main…
view full answer...I had the Demco 2-Tang Clevis - Adjustable Channel Mount #DM05593-97 measured and from end to end, it will be 9 1/4 inches long.
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...