Filter Products
Filter by Ramp Application
$17.98 - $103.55
Videos
for Car Ramps
Help Articles
for Car Ramps
Expert Answers
for Car Ramps
We have some confusing pictures on our site for the Gen-Y Aluminum Loading Ramps part #GH34FR and I apologize for that. The actual ramp has a slot mount style on one end and a tapered end on the other which you can use either end depending on what…
view full answer...I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when loading/unloading,…
view full answer...I was able to verify that the weight capacity for the Aluminum Car Hauler Ramp Set #288-07503 that you referenced is indeed 6,000 pounds (not kilograms) for the pair and 3,000 pounds per panel. The recommended maximum height of 16 inches is simply…
view full answer...I do have a solution for you, but the Aluminum Car Hauler Ramp Set #288-07503 that you referenced has a max height of 16" for loading equipment. I did speak with my contact at Gen-Y Hitch who said that their aluminum loading ramps…
view full answer...If you are only putting brakes like the #TRU36FR on one axle, we recommend doing the front axle for a few reasons. First, the front axle technically will bear more weight than the rear. Most trailers it would be about 60% on the front axle and 40% of…
view full answer...To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button (using the…
view full answer...The shock absorption from the Gen-Y Torsion 2-Ball Mount #325-GH-1324 will help cushion abuse on your trailer tongue and the tow vehicle. However, you need to make sure you have enough tongue weight for this to be effective. The optimal ride tongue…
view full answer...I have another option for you, but due to the length of the ramp you would not want to use the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" #288-07501 any higher than 12" as it could cause the ramp to not be secure and will be a pretty…
view full answer...The Race Ramps Wheel Chock for Vehicle Service part #RR-WC-2 will fit on the main platform of the Race Ramps Heavy-Duty XT Ramps for Service and Display - 67" Long part #RR-XT-2-HD although it may hang off just a bit depending on the size of the…
view full answer...Each of the Gen-Y Hitch Aluminum Loading Ramps in the Set #GH34FR weigh 94lbs.
view full answer...The ramp set part #288-07489 that you referenced has a combined weight capacity of 3,000 lbs for both. Individually each has a 1,500 lb capacity and each ramp has three prongs that lean on the trailer. So each of them is rated for 500 lbs basically.…
view full answer...In order to use your reverse lights as utility lights you would have to have a separate 12 volt power wire running to the lights. You would need a switch and you would need diodes to prevent back feeding. You would need to run some wire from the 12…
view full answer...