Videos
for Camping Kitchen
Help Articles
for Camping Kitchen
Expert Answers
for Camping Kitchen
The height of just the mounting bracket of the MORryde part #MR73QR is 6.6 inches and the length is 30 inches. It weighs 84 lbs.
view full answer...I agree, that note doesn't make sense. When I reached out to my contact at MORryde they said the MORryde RV Generator Slide Out Tray #MR79RR doesn't have a stopper for when the tray is in the fully opened position so you just…
view full answer...I got some information from Yakima and included a diagram of the EXO SwingBase #Y34VR, which is the base part for the EXO SwingBase 2 Tier #Y82VR. Though the measurement from the pin hole to the closest edge of the carrier is not included in said…
view full answer...The Yakima EXO SwingBase Swing Away Hitch Extender #Y34VR measures 33" from the center of the receiver out to the arm. While this should be enough room for you to open up the rear doors on your 2005 Ford Econoline, we haven't…
view full answer...Depending on the length of your crossbars and the width of your bed yes, there is a way to mount the Yakima OutPost HD ladder rack system on your utility trailer. What you're going to need are the Yakima HD Tracks, like the…
view full answer...The MORryde Trail Kitchen with Stove Tray #MR73QR has a platform that is 25-1/2" long and 15-3/4" wide. The Dometic CFX75 Cooler is 34.92" long and 19.48" wide which is much to large to fit this platform. Of the…
view full answer...The vast majority of trailers on the market use a standard coupler (installed on top of the trailer frame) which is compatible with the B&W Continuum Weight Distribution System w/ Sway Control #BW28FR. Underslung couplers aren't as…
view full answer...Hi Tony, thanks for writing in and yes, we can 100% get your 2023 Jeep Wrangler set up to be flat towed behind your Holiday Rambler motorhome. To make it easy to order I'll go ahead and list everything out for you. - Base Plate Kit:…
view full answer...There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer…
view full answer...The height setting you'll need to use when installing the Curt A16 head part #C16520 that you referenced is going to be based on what your trailer needs to sit level. The height of the head is adjustable as well as how the pin box attaches to…
view full answer...From the center of the hitch pin hole to the upright portion of the Saris swinging hitch adapter #SAR36VR the measurement is 9 inches so this would easily clear past your spare since it is 7-3/4 inches out past the rear hitch pin.
view full answer...The Timbren Axle Less Kit part #ASR2KHDS03 that you referenced is essentially a 2,000 lb axle so it would take two of them for a 4,000 lb trailer. If you have a 4,000 lb trailer axle the most similar option that would work well you'd want…
view full answer...