Super easy install if you read the instructions
which i highly recommend.
Delivery was seamless these people actually do what they say.1747827

by: Gerry M04/20/2019

I use your product when I transport my dirty bike on the back of my Jeep. It does its job very well of keeping the bike from sweating or bouncing around.633617

Click to Enlarge

Click to Enlarge

Gerald M.

5/16/2020

Still working excellently

I purchased this product to use on my SxS and it worked like a charm. Rattle is completely absent at the hitch. I was initially shocked at the quality of this product. It's heavy steel, which makes me confident it will last for decades. I would highly recommend for any hitch application.721112

Click to Enlarge

Click to Enlarge

by: Craig11/21/2023

Have not used it yet George 1694865

by: Joseph 04/12/2023

I think this feature should be incorporated in all your hitch assemblies1555404

I received the stabilizer very quickly. I have not had an opportunity to use it yet, but I have checked it out on the hitch to make sure it fit correctly. It fit just as described and the receiver hitch is very tight. I think it will work great. It will be tested in a few weeks as we are headed out on a 1400 mile trip. 246552

James

4/23/2017

During that trip that we were on, the bracket fell apart. Would not recommend this item at all

After modifications this did finally fit and hopefully it will work. I asked you folks to make sure it fit correctly and was assured that it did. Well that is not the case. Had I not been as handy working with metal this would have been a very different outcome. The part in question was rubbing against the chain anchor loop and would not fit or tighten correctly. Wanted to send it back but modified it instead. Not real happy about being assured that this fits and then does not !! You folks could do better in my humble opinion.160021

Donnie-a

4/20/2015

Thanks for your review. Just checked my 08 Ram 3500 stock hitch, and yup, 1 behind the mouth of the hitch are the chain loop anchors. It appears this product doesnt fit. Its a shame they do not give the dimensions from the ring edge to the edge beyond the wing bolts. How did you modify?

I have been looking for a product to better secure our bike racks behind our 5th wheel. This should do the job.614177

Michal

3/27/2020

I wish I knew about this product 5 years ago

The Brophy stabilizer bracket completely eliminated the annoying trailer hitch rattle. Very pleased.791741

Jimmy

5/3/2021

Great! Love the fact that the hitch doesn’t rattle when you go over speed bumps,etc.

This is a good device if you are using it on exactlhy 2" square tubing, but it will not fit over the knurled edge of an extension piece where the extender is 2" but the knurl is ¼ thiskce.362722

Sly

4/4/2018

I quit using it and just use a ratchet strap. It was difficult to use.

by: David G.03/01/2017

The piece is made well, and could conceivably work, but the problem is that our trailer hitch (the receiver, on our car) has a lip around the edge of it. This piece does not fit around it, so it is pretty much useless. I have looked around and saw that pretty much all other hitches have the same lip, so this device is useless for all hitches. If it could fit on a hitch that didn't have a lip, then I think it would be a good device, but I haven't seen any hitch that this.347357

by: Joe W03/04/2020

This device made pulling my 35 foot trailer much better. I did not realize how the small amount of movement in the ball hitch amplified to make the trailer feel as if it were swaying. With this device, that is all gone.

The only problem I had with the device was the tightening bolts. They are soft and mushroomed after extended use of the device. I replace them with hardened bolts and have not had any issues since. 763016

I have BOTH the "J-Pin" and this anti-shake thing to stop the shaking in my Yakima Swing out 4 bike carrier. My bike rack is an older model so it maybe slightly heavier than the newer versions. This anti-shake will NOT stop your shaking. It will "reduce" the shaking. I think for this to actually STOP the shaking those tightening screws would have to go thru the steel wall of the hitch and be in direct contact with the rack itself. Would drilling into your receiver weaken it? Perhaps. But I'm not towing a yacht so...But I wouldn't recommend it.
The torque the carrier/bike rack puts on the receiver hitch is what challenges products like this. So if you want to reduce the swing then get this thing. If you want to stop the rock this is not the pop.
289834

by: Ram150006/25/2016

Unfortunately I could not use this on a 2015 Ram 1500. The adjustment bolts just did not fit the profile of the Ram's hitch.
I think one can be made to fit the Ram's hitch but it would need to have the bolts in a different location.
From what I could tell, this is a solid product. Tried it on a older hitch, just for sizing, and it it looks like it would be able to stabilize any reasonable loads.
It's a great idea and a well made product. It just did not fit my applications.265119

by: John M09/18/2017

The T-wire harness was great, installed well and works fine.
The Seat covers are great as well, durable and easy to install, will consider rear seat covers if available?
The stabilizer bracket would not work with my platform rig, but looked of good quality and I will find a use for it.434034

by: Scott 09/28/2022

Good product. Definitely reduced the noise when towing. As always, you need to check the tightness of the two screws and the locking nuts every trip and when you stop for gas.1428327

by: Hugh08/03/2018

Good idea. But application limited to smaller trailers. Not appropriate for large trailers w/ tongue weights of 800/1000 LBS and GVW around 10,000 LBS.

My experience was:1) the plastic twist knobs broke; 2) and both the set bolts bent so as to make them unusable to loosen the bracket. I had to cut the bolts off with a hack saw.549380

We received it today. Hit a snag though, we have a Jeep Grand Cherokee Overland and the item will not fit. The two rings (part of the hitch) that the trailer safety chains connect to obstruct the piece at the bottom and will not let it slide up flush with the hitch receiver so that it can be tightened. If those rings were not so close I know it would work perfectly. So - we have an RV mechanic that does all of our work and we will review this with him and see if he can make a change on the hitch rings that would allow us to use this product. It's not the product that is the problem it is the make of our hitch. 560681

I purchased this to use on my hitch on my camper bumper to take the movement out of the carrier that I use. The way the stabilizer bracket is designed it will only slide over the hitch a small amount (the bracket hits against the hitch). It took most of the up and down movement out of the carrier, but did little for the side to side. This would work very well if I had more clearance. However, I have 3 hitches (one on an f250, one on a ranger, and one on the camper) and I only have enough clearance on one of the three hitches for this to work effectively. On the other 2 the brackets that a tow chain attaches to interferes with the mounting of the stabilizer. I would recommend this to those who have at least 1.5 inches of hitch for the stabilizer to slide over. If you have less it will not work very effectively.446415

I was not able to fit on my hitch receiver because the receiver is too close to the rear bumper. I will have to consider the U-bolt type. 581060

Heather A.

11/9/2018

If you do not have enough clearance for the anti-rattle part # RHSB I recommend a roadmaster quiet hitch for 2 inch hitches part # RM-061. The way the quiet hitch is angled while in use should not interfere with your bumper.

Helpful Links

Hitch-Anti-Rattle/Roadmaster/RM-061.html

by: Tom S.05/09/2019

Well made, heavy duty. Solved problem of trailer swaying and clunking when starting and stopping. Takes the little play out of the receiver hitch.639925

by: Josh B07/06/2020

Close to a 5 star, the reason for 4 stars is due to the plastic t handles to tighten. If you want it to stop rattling you need to use channel locks to tighten the “T” handles and after a year the plastic wears. For the price I would just buy another once they wear completely out.828836

by: Leonard Ruiz06/06/2016

I use this product in order to secure a bike rack that was driving me crazy every time I used it. The hitch accessory eliminate the noise and has sit up to multiple 300 mile plus road trips. 258080

I could only static test this at present. I have considerable play in the original unit. I placed this unit on and tightened the bolts. There was absolutely no movement after that. It will get its true test on my next 5,000 mile trip.

I did read that a couple of people had a problem with the lock nut working loose. That is an area which would be prone to coming loose. So, I added a stainless steel lock washer between the lock nut and the flat washer for a little extra security.

Several people had an issue with the bolts landing on the raised lip of their hitch receiver. However, on my F-150, it goes over the lip and tightens on the flat metal. That makes a secure connection.505143

by: John C.07/03/2017

Had to take it to work and have them modify it to work with my Blue Ox hitch. Beefed it up with 1/2" bolts thet did away with the hand tightening. Now when I arrive to my destination everything is tight.401405