Product Specs:
Trailer Hitch
Custom Fit Hitch
Class II
Concealed Cross Tube
1-1/4 Inch Hitch
350 lbs TW
3500 lbs GTW
CURT
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Video of Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Average Customer Rating: 4.7 out of 5 stars (181 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.Fast shipping, high quality construction, and very easy installation. I didn't even need to jack up my Subaru. I only needed a 1/2" drive ratchet with long extensions, torque wrench, and help from a buddy to hold up the hitch while I bolted it in place. Could not be happier. The electrical was breeze. And the Euro ball hitch helps keep trailers level. The e-trailer videos took all the guess work out, and were much simpler than a black-and-white instruction manual.
The hitch got here on time and the installer installed it in less that an hour. Thanks, I love when things go as planned!
The hitch went on with no problems. A perfect fit. The wiring harness was even easier. Found the plug near the compartment where the spare tire is and just plugged it in and ran it through a hole in the bottom of the compartment. Took less than a week to receive at a very good price. Saved over 300 from having it installed at uhaul.
This hitch is legit, made out of nice thick steel. The fitment is is perfect and it hides nicely under the bumper without showing to much metal.
I have an invidia catback exhaust and I had shorten the mid section by 1/2 inch so it would clear the hitch. Original hangers still work. The exhaust tip was a little close to the hitch so I put some adhesive foam just in case it would hit.
Been using for a year and it's holding up great. The install video helped make it a smooth and easy process. Nice for little things like bike rack or even something bigger like a trailer with two motorcycles on it. Great product
The order process was easy, the receiver was well packed and arrived quickly. I installed this in my driveway on a 2003 Subaru Forester with no rust. The directions were clear. The fit was perfect. On a 1-10 scale of mechanical experience I'd give myself a 5. I had no issues and completed the instal in 30 minutes. I pretreated fasteners with penetrating oil and used silicone spray on rubber. I used a channel-lock pliers to remove the rubber exhaust hangers.
Fit like a glove
Love our trailer hitch!! Was an easy installation, we had it on for 15 minutes and was alright using it to haul our bikes to the trails! Thank you etrailer! Very happy with our purchase!
My favorite part about placing this order were the confirmation emails. George emailed; not a robot. George kept me informed throughout the whole process. Jeff installed the hitch in 30 minutes. I like the low profile. We are looking forward to using the hitch to tote our bike around.
It works fine, no issues
So far, so good. Got it mounted on my 04 subaru forester without having an extra hand/nor dropping exhaust. Took roughly 40 mins for this B-rate home mechanic. Looking forward to pulling something!
Thanks for making buying this fast and easy! This comes with light instructions, so I highly recommend using online tutorials for the step by step process and knowing how much torque you need for the bolts.
Straight out of the box and on the vehicle. The hitch fit perfectly and the only thing that slowed me down was putting the bolts back on. It took me time as I did it myself, but was a surprisingly easy piece to put in. Excellent product! The picture is not great, but the part fit wonderfully.
I will update this according to etrailer's response and efforts to reconcile.
I will do my best to be constructive, yet the fit of this hitch is anything but. Let me explain.
First, the detail on the paperwork is barren at best. Second, it has the bolt measurements completely wrong aside from the provided bolt (for the exhaust mount?) which doesn't match up with the vehicle when the hitch is seated . The bolts that are on the vehicle are 14m and 17m. Not 12m as indicated on the install sheet. So that was a hassle when preparing to find out that I needed different tools/so much for prepping.
Also, the tear down to allow hitch access to frame is more extensive than indicated which leads me to believe your company leaves these details out in order to sell the "easy fitment" solution.
The breaking point for me though came when I removed the passenger side bolts which also secured the vehicle's EVAP system and can not be reinstalled with this hitch/will not allow the reseating of the EVAP system's mounting bracket. So, in essence, this hitch DOES NOT fit this vehicle.
After all this and full day of futile compromise I now have come to the conclusion that my plan to install the hitch, rent a trailer (already reserved) and move my 4BR household this weekend has now become a nightmare of uncertainty and an embarrassment to those counting on my decision to go this route. What do I do now? I guess it's a last minute scramble to find (hopefully) a truck rental or a moving company who specializes in exorbitant fees towards folks in my predicament, one which the hitch was a resolution away from...for naught.
While I found you professional and enjoyable to work with and the product presenting a generally acceptable quality, not fitting the vehicle renders these benefits useless and most importantly costs me dearly in both time and further expense.
I could never recommend this path to anyone, friend or foe. I wish I had a better report...more for me though than anything else, painful to say the least, rendered by etrailer.
I am an OTR driver who spends 3 months out on the road so the small window for me this week to move has been turned upside down, sideways and when I say nightmarish, I mean a complete disruption of life and a madness that no one should have to experience by the negligence of a company who seems to have put sales above reality and truth. It feels criminal. This has wrecked everything. I've been robed of so much and scrambling now to figure out what to do. I have 4 days with desperate stares in my direction as to what what we do now.
Thank you? For a huge lesson, seemingly where not to patronage, unless you or the techs have some sort of resolution for me. I expect a call from you to discuss the options in front of us. This is bad.
Mike L.
3/28/2019
Were sorry to hear about the difficulty youre having installing your hitch. After looking over your description of the problem, it seems the major difficulty you had was the installation of the bracket that holds the charcoal canister. I did look over the installation instructions, which I must say arent very clear. The bracket for the canister should be sandwiched between the hitch and the fame member, which will allow the hitch to be installed and the canister to be reattached. If you use the link above showing the hitch being installed on a 2003 Forester, you can see an install video that should make this a little more clear. As far as the hardware goes, when Curt refers to the bolts as being M12, theyre speaking of the diameter of the threaded portion of the bolt, not the actual size wrench needed. This hitch has been around for several years, and it appears that the instructions have not been updated in awhile.
Helpful Links
Everything was as advertised EXCEPT installation issues (possibly pertaining only to a 1999 Suburu Forester). While production qualities of the video demonstration were questionable, nevertheless after reading its transcript in conjunction with viewing it multiple times I became clear about the essence of the install. The predicted install time (ie actual wrench work after having watched the video multiple times, etc) would have been accurate EXCEPT for a detail pertaining to re-threading of the bolts back into the car frame to secure the trailer hitch. The problem was that the nut-plates inside the frame were not held securely in place via a weld, rather Suburu chose some method that was not reliable. As a result, the very act of removing the chassis bolts tended to slightly miss-align the nut-plate lying behind the chassis-holes. This caused no end to heartache, adding something like two hours to the install! So excessive finesse and tedious adjustment of nut plate with hole using a screw driver was needed to overcome the problem. While we did succeed, nevertheless I was nearing the end of my rope, and anticipating failure in the current trend, I conceived of a solution just in case further finesse failed. Here it is if anyone finds it useful.
Obtain the appropriate length/thread/diameter metric SET SCREWS (probably Allen-head), and finesse them into the nut-plate WITHOUT the Hitch in place (a far easier proposition). Then using these protruding set-screws (with long enough length) to serve as “place holder studs” remove ONE a a time (with an Allen wrench), and replace it with its bolt counterpart; do this until all set screws are replaced with bolts.
Apart from this unfortunate occurrence (which I consider Suburu’s poor design choice, not Curt’s), service was great from eTrailer, and I am a satisfied eTrailer customer!
Dave L.
Patrick B.
6/3/2013
Dave, we totally agree. Some of our older videos leave a little bit to be desired. We have upgraded our methods, equipment and systems to improve the quality of the videos. We choose to leave the old ones up because an older, less polished video is better than no video at all.
First of all I’m getting annoyed on how this is not fitting properly. I’m battling installing my this and hitch is off. Seems like the welding job done on this hitch for my 2005 Subaru Forester XT is trash, garbage. I have a Turbo XS exhaust and that alone won’t fit. Took it off and install my stock muffler barely fits. Stripping my bolts and exhaust hangers are not on. I had to grind off the bolt on the exhaust hanger because it wouldn’t fit. Probably have to zip tie it to the hitch. Etrailer, keep in mind most people have aftermarket exhausts and not everyone has stock exhausts. Very poor job on this hitch.
Mike L.
7/26/2019
When the hitches are designed by Curt, the fit is mocked up using a stock vehicle with a factory exhaust. Due to the unknown nature of aftermarket modifications, fit cannot be guaranteed on vehicles that have had modifications made.
Nice looking hitch, hides well. Install was fairly straight forward. Took me about 1 hr to install with air tools (I'm an ASE Master Technician-this is on my own vehicle). Did not come with new bolts, wasn't advertised as such, I just missed it; other advertised hitches on etrailer.com came with hardware. Existing bolts were too short to make me comfortable towing anything near capacity-I will replace the factory bolts with longer ones soon. Hitch mounting flanges were a little bent inwards that required some persuading with a pry bar and held with a vise grip to get the bolts started. Tip to installers-once the hitch is in place, start ALL of the fasteners with a few threads; then once they are all started, then torque to specification. This will prevent fighting the hitch on subsequent bolts.
I would DEFINITELY buy from etrailer.com again, great experience.
Patrick B.
10/22/2013
Curt, the hitch manufacturer, specifies re-using existing hardware. One new bolt and one new nut are included for re-mounting one of the exhaust hangers to the hitch.
Great product and service. When I need trailer hitches etc. I will be sure to go the E trailer. It will be used to support bicycle racks.
Bill P.
5/12/2016
Its been working great. I use it to transport bikes.
I received the hitch in a few days. The box was in rough shape, but the hitch survived with no damage. The installation was no problem ('06 Subaru Forester) , except the rear left muffler hanger did not align perfectly with the hole. As a result, the muffler hanger is touching the hitch and causes a very annoying vibration.
Donot
6/14/2015
I have the same vibration noise where the left muffler hanger is hitting the top of the gap it is supposed to slide into on the new hitch. Seems like a crappy design, the hole should be higher. Looks like I am going to be bending some muffler hangers in a few minutes...
A little tough to get installed, but, once on, the etrailer hitch receiver worked great On my Subaru Forester. I have a heavy-duty bike rack that is often tasked with carrying bikes loaded down with gear, and my hitch has never shown a sign of not working properly. It works as well as it would if the car always had a hitch. Great product. My only complaint or regret is that the hitch receiver placed the bike rack in such a way to obscure my license plate.
Installed on a 98 Forester. I was impressed with how well it lined up with the holes, including allowing the charcoal canister bracket to remount in its location, etc. Would have been nice if it came with new fasteners, but there was adequate length on the stock ones. The captive nuts in the car's frame are not actually welded to the frame, but are threaded into a large steel plate that is somewhat loose inside the frame member. This means you need to use a screwdriver or similar to poke them around to get it to line up, but this has nothing to do with the trailer hitch.
I did have to remove the three rubber exhaust mounts near the muffler (two behind and one in front) in order to let the exhaust sag enough to slip the hitch receiver into place, but I did *not* need to actually undo any fasteners, which was good. The flat bar on the left of the receiver fits perfectly above the muffler, which is a place I've seen other brands foul.
The only gripe I have is that the safety chain loops are welded in such a place that they interfere with the "L" shaped part of the pin you use to secure a tow ball. Even using all Curt brand stuff, you can't rotate the pin enough to get the clip on. Cutting the L part of the pin shorter was easy work with power tools, but would suck if you were trying to use a hacksaw. Perhaps other pin designs wouldn't have the issue.
Overall very satisfied, build quality looks good and it really tucks up under the car with no reduction in clearance.
Very good fit. Didn't notice an exhaust bracket bolt was included as it was wrapped in the plastic around the hitch frame. It would of made the job easier if I had seen it or knew it was coming but none of the tutorials or packing slips mentioned it. Definitely recommend. This was for a 2008 Subaru Forester.
Rob G.
5/26/2016
Great! Towed a 2k trailer 950 miles uneventful
Everything fit perfectly. The only problem I had was getting the charcoal cannister to line up with the bolts. I put the pin in but could find no way to get the clip on it because of the safety chain loops.
Stephen G.
1/15/2018
Trailer hitch working fine but have not had to use wiring yet.
Overall the hitch install went well. Had to drop both rubber hangers of the exhaust to fit the hitch above it. If it weren't for my neighbors impact wrench, I might still be working to loosen the bolts so beware. I sprayed with WD40 two days in a row before attempting and I don't know how much it helped. Liquid Wrench might have worked better. The only other thing is my exhaust shakes a bunch (manual transmission) and the square hole on the left side of the hitch isn't quite in the right spot so now I get metal from the exhaust hanger hitting the hitch. I'm working on a solution for that (thinking some foam/electric tape).
Jc
12/9/2012
I had this same issue 2007 Forester, with the exhaust hanger hitting the hitch because the left driver side square hole seems to be too low, not high enough to keep the exhaust hanger from hitting the receiver at times. May have to grind a little arch above that area.Anyone else have a solution for this?
Patrick B.
12/11/2012
Helpful Links
Easy to install, great fit, safe and reliable.
Installed the towbar on a 2005 Subaru Forester using the auto hobby shop on base (the vehicle lift and hefty tools-to-borrow made all the difference). Took me about 1.5 hrs to complete the install. The only "downside" is that the hitch is really low so I ended up using a tow-ball with a 2" rise and it still seemed low. But it is what it is, and that was the fix.
Customers compare C12038 to these similar products
VS
Product Specs:
Custom Fit Vehicle Wiring
Trailer Hitch Wiring
Powered Converter
Custom Fit
4 Flat
CURT
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Video of Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Average Customer Rating: 4.8 out of 5 stars (331 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.The wiring, platform, and hitch fit with no issues. A couple of brackets had to be removed but my car service guy said it was no problem. My only problem is I still need a pick up truck. The set up is good for small light loads but my Subaru is just too light weight.
The trailer wiring harness was perfect for my Subaru! It was easy to install and worked correctly.
It helps a lot to read the directions. Well made product and worked perfect first time connected.
I'll start off and say that this product looks and feels five star, but I'm docking it one because the installation docs and video are very mismatched and conflictive. The one-page paper installation doc was barely applicable, while the video was much, much better. Use it!
Pulling out the few pieces of the car necessary to gain access to the OEM plug was relatively easy. Where things got messy was where to actually put the "control" block for this thing. The video shows a self-adhesive backing which was not present. There are included zip-ties but no really good place to use them. I didn't want to leave it loose in there to become yet another rattle in the car, so I ended up securing it with that foil tape used for duct-work. It seems to have done the trick.
Routing the cable was easy, and I dropped it under the spare tire and through a grommet, resealing it with silicone when I was done. I'd have loved to see some kind of cable management included for under the car and around the hitch, rather than the four independent wires being just ad-hoc wrapped around things.
Electrical testing worked flawlessly, and all outputs were signaling correctly.
True plug and play! Video was great except my harness was on the driver side of my 08 outback not the passenger side.
Worked out great, installed on wife's 09 Outback and not mods needed, direct install just like described.
Great product. This took under 5 minutes to install. The Forester 2006 had the electrical connector under the floor tray on the passenger side at the very rear under the taillight hidden by a plastic flap. Lift up flap, plug in, then snug the hardware into the side well.
You can run the wire and trailer connector through the 1" hole at the rear of the wheel well capped by a large rubber plug so the wire disappears under the spare.
Box arrived with a couple holes torn and hitch hanging out one corner, but l accepted it hoping for the best. Installed hitch and wiring harness by myself in about 2 hours from start to finish... probably could have done it faster with help, starting the bolts was frustrating but doable nonetheless. Product seems well made, no complaints there. Dealing with Etrailer has been a good experience so far and will most likely be a returning customer.
Attached pic of hitch hiding under bumper, just how l like it!
Product, shipping, website, return policy all were perfect. Will for sure use this site in the future. Only reason i didn't give it full excellent review was because I found my hitch cheaper two on 2 other sites. That being said those sites didn't have the amount of reviews etrailer did which further explained the ease of install by customers....and gave me that desired warm and fuzzy feeling when ordering from the World Wide Web :)
Wiring installation instructions complete with pictures made me feel like superman with a phd. Well done etrailer. Well done.
I'm used to the pain of wiring small trailers but this harness makes it pretty idiot proof. Find the plug-in on the vehicle, plug it in, install fuse, fish the plug through the spare tire area and boom. Easy peasy! I haven't checked it to verify it works but I'm guessing it does. Thanks Etrailer!
Great internet service, good customer service, great experience will use this company in the future for sure !
Jack W.
4/9/2022
Excellent product, works great, this is the third product purchased from etrailer they all are quality products
quick install, and worked well! So much easier than trying to freestyle the wiring.
Shipped on time as advertised and complete. Instructions were well written and accurate for hitch itself, but missing a couple steps for the electrical connector kit, (as for taking apart the car trim) so took some time to figure out. (The instructions were from the manufacturer and not etrailer.com itself). Connector worked fine on installation.The fit of the hitch was very precise, so precise that at first I thought it wasn't the right model. But I persevered, and it did fit. The close and precise fit is appreciated, it should help eliminate possible looseness, rattling, and weakness. This is my third Curt hitch from etrailer.com on 3 different cars. I would definitely buy from them again.
Kent R.
12/27/2017
These are not the first Curt products I ordered from Etrailer. After a year, I have no complaints about the products, and certainly none about Etrailer. I find the Curt products well designed in form, fit, and durability, and etrailer a fast and efficient way to order them.
2008 Outback
Wires are good quality. Instructions could be a lot better. "remove left and center black plastic, after locating wire..." The words "wire connector located just forward of left tail light assembly would of been better than all of the instructions given. The plastic on the side goes from the tailgate past the back seat and you don;t need to remove it. You only have to remove a screw in the corner but I had no idea which panel it was behind, center or left towards the front back or middle. Step 2 for outback refers to fig A but mine looks nothing like it, mine looks like fig C.
They also say Tools needed : phillips screw driver. That's it. And step 2 they talk about using a pry tool.
The kit also includes a grounding electrical connector, a electrical splice fitting and a self tapping sheet metal screw with no reference as to what to do with them.
Spending ten minutes to write some instructions would make this about perfect.
Rodney A.
8/12/2018
I use this frequently and have had no problems with it.
Easy peasie is what this is. Quick connect inside vehicle makes it easy and the videos are great too. Thanks again
Complete kit,easy installation. The wiring harness connected directly to the auxiliary wiring found in the left rear inside pockect of our 08 subaru Outback. All lights on our 2 trailers worked the very first time . We've had this kit for a little over a year, With zero problems. Many thanks to Curt for quality product. Also many thanks to etrailer.com (Laurae) for their fast friendly service.
Dennis B.
1/17/2018
Its a great product. Still performs flawless after thousands of trailer hookups.
Plugged it in, i have lights!! My 02 Forester came with a harness, but when i plugged it into my trailer there were no lights on the right side. I emailed George, got some very helpful diagnostic help, and determined the old harness was faulty. Ordered the new one, plugged it in, viola...good as new :) cant say enough good things about etrailer.com, but i will add that EVERY online business should operate this way.
Erik K.
7/8/2016
Hello, and thanks for following up after the 1st year has elapsed.Product still works great. Etrailer has a customer for life in me, I remain impressed with my experience there :
just what it was supoded to be.nice clean uneventfull install and it works great.instructions were spot on.pictures on instructions could be clearer but were goodenough.would buy this product again.
The curt trailer wire harness is perfect for 2009 subaru outback. thanks so much for info and product. I will buy additional harnesses as backup for our other cars since my 2009 connector broke at an inconvenient time.
William
11/6/2019
Curt trailer wire harness is still excellent after 1 year.
This harness replaced a Draw-Tite one that failed after about 4 years of occasional use. I'm hoping this one, with revised circuitry, lasts longer. It was trivial to install, as it has the correct pin connector for my Forester. In contrast to the previous harness, it has a dust cover and a 10 amp fuse. It worked fine on a 200+ mile drive (including the load for a camera I use for a rearview in my travel trailer).
Kwame M.
7/18/2016
This harness still works perfectly. Like others who bought it, I keep the wiring inside my forester when not in use, rather than mounting the external portion of the connector to the receiver hitch.
Product arrived on time and was very easy to install. My hook up was right where "etrailer" said it would be and the video made it as simple as plug and play. I hooked it up the day I received it and within 17 minutes I was loading my trailer with deer stands and heading to the woods. The product was perfect in function, price and ease of install. Will definitely use "etrailer" again.
Thank you, John
John Y.
8/19/2015
Still working like new.
The wiring harness/trailer plug worked great, no problems except for the installation instructions. I had to look elsewhere for instruction on how to get to my particular vehicle's built-in plug. The included instructions were not wrong, just too vague. A link to a website with more specific instructions would have been nice. Delivery was quick.
Mark M.
12/18/2014
It works perfectly, no problems at all.
Product seems correct but it was shipped in the same box as the trailer hitch with no packing material and the box the wiring came in was smashed by the hitch and it’s contents were scattered inside the shipping box.
Jenny N.
4/19/2022
I will have our Customer Service team reach out to you.
Worked perfectly with my 2002 Outback wagon and Uhaul trailers. On this model, the harness attachment is found in the back underneath the carpeting and foam over the passenger side wheel well.
Michael
11/13/2020
Still works as advertised
So far everything worked out. Shipment took 3 days instead of 2, but was happy as many packages were delayed longer because of the storm. Thank you for getting it out the same day as I ordered.
Installation went well and was just as your video described. Will test it this afternoon when I pick up the trailer. Even in 10 deg F weather, the installation went very easy. Good thing, finger tips were cold!
Drew P.
2/20/2015
Worked out great. used it about 5 times so far. Easy to use, and easy to install.
Customers compare C55370 to these similar products
William
12/12/2022
The hitch receiver is in use quite often. After a 2,600 mile cross country move carrying a double bike swing-away rack in high cross winds it was as solid as the day I installed it. Altogether I have installed three Curt hitch receivers on Subaru vehicles and all the installs were quick and uncomplicated.