Product Specs:
Trailer Hitch
Custom Fit Hitch
Class III
Visible Cross Tube
2 Inch Hitch
400 lbs TW
4000 lbs GTW
CURT
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Average Customer Rating: 4.8 out of 5 stars (60 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.Fast delivery, hitch fit great. I brought this hitch from another vendor in Texas, and the shipper lost it in transit and didn't fine this out for 8 days. They didn't ship another they gave me a refund. I ordered from you guys and had my hitch in 2 days.
Product arrived promptly in great condition. Installation time was 15 minutes but I viewed the install video before I ordered the product. Hitch looks very nice, installs a snap, and I recommend it and etrailer.com highly.
I ordered this hitch on a Sunday morning and it was at my door by Tuesday afternoon. Couldn't be happier with it. Installing was a breeze. Good job etrailer! I would definitely recommend to a friend.
Installation was easy. Haven't tried it yet.
Love how easy this was to install. Instructions were clear and product holds up nicely. Thank you etrailer team!
Works great.Easy installation. Good job on the paint as it's not showing any corrosion.
Installation was fast and easy. I used a car jack to keep it in place and installed it by myself. The toughest part was removing the existing bolts in the frame. The angle of the bolts on the passenger side are hard to work with if you want to use power tools, so get a ratchet-wrench if you don’t have one. It looks great on my Jeep, can’t wait to use it!
Good product at a good price. Removing the 9 year old bolts from the Jeep was by far the hardest part. Curt gives you two sets of bolts to use and you pck the right one depending on the application. But, the two are only very slightly different. They have the same thread/inch and are only very slightly different diameter. Pick the wrong one (I did initially) and you are in for frustrating time. Otherwise, it will work perfectly for me.
The trailer hitch works fine. Now. Bottom line the hitch didn't fit. Only two bolt holes would align with the Jeep frame. Front or back, your choice but only two. I attached the front holes, then uninstalled it and drilled the rear holes of the hitch to enlarge them to allow the bolts to align. First and last time I will buy a Curt. I have never had an issue with Draw tite.
Ive had mine on my 05 Wrangler for a year now. Works flawlessly. Easy to install, stays secured, none of the bolts have walked out or loosened. Installed it and never thought about it again
I’m very pleased with this purchase. Easy to install and the wiring was spot on. Great service.
Cons: Handle nuts broke off before I could torque it. Had to drill a hole into the frame as I could not align it, it was literally 1 mm off.
Pros: Great customer service from Curt, they definitely stand behind their product. This hitch sticks out little more compared to other hitches. Combined with Yakima DoubleDown Ace rack it cleared the stock spare tire on my 2004 Rubicon.
I bought the hitch for my 2006 Jeep Wrangler Unlimited.
It all works great. The Curt website with video installation instructions is really helpful. Now I can do more with my Jeep! I bought a platform for the hitch so that I now can carry my Kawasaki 250 down for repairs or have fun taking it camping.
This is my third purchase from e trailer. The products have always arrived quickly and for my model of Jeep. The parts fit well and the installation times and descriptions are usually pretty accurate. The hitch fit well with no drilling and took about 30 minutes.
My Curt Class 3 hitch fit perfectly on my 2006 Jeep Wrangler easy install everything as advertised. Very pleased with the service my part arrived sooner than I expected and with no damage. Pretty good considering I live in rural New Mexico. Thanks
Great hitch - thank you etrailer - very good service, great product and easy quick installation - the wire harness is a perfect fit. This is my second order and again I was not disappointed
This is my third order from etrailer and my hitch arrived in three days.The box arrived in good shape and the hitch and parts were well wrapped. This company had great service and I will definitely keep ordering my parts from them.
I have a 2000 jeep wrangler this trailer hitch fit nicely. I feel very good about using it because of the quality and how it attached to the jeep. The over all experience from purchase to delivery with etrailer.com was great. thanks etrailer.
This is my fifth trailer hitch from etrailer, great selection of products and accessories.
Fantastic detailed instructions, easy to install. Very pleased with everything you
have to offer. Would not consider a purchase from any other company.
Order was filled in less than 24 hrs, was shiped in two days and received in 6 days from original order date.
Received emails as to the progress from start to finish. And I received a quality product. Could not be more satified. All companies should model their customer relations after etrailer. Keep up the good work.
It was a quick installation no drilling. Complete the install in less than a hour by myself
Can't say enough good about etrailer. Massive inventory. Great prices. Super fast shipping. Everything well packaged and exactly as described. Thanks!!
REALLY easy to install. I had an aftermarket exhaust that got in the way but that was a minor work-around. Got it done by myself with a jack holding the other end. Took 30 minutes.
Installation was easy but very easy to mark up while putting it in. The coating on the tube scratches easily. Other than that fits perfect on my 2000 TJ.
Ask the Experts about this CURT Trailer Hitch
Do you have a question about this Trailer Hitch?
VS
Product Specs:
Trailer Hitch
Custom Fit Hitch
Class III
Visible Cross Tube
2 Inch Hitch
400 lbs TW
4000 lbs GTW
CURT
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Average Customer Rating: 4.9 out of 5 stars (419 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.The build quality of this hitch receiver is excellent -- wonderful fit and finish. It fit perfectly on my 2006 Jeep Wrangler, and the finishes all look very high quality. I put a 1up bike rack on the hitch receiver and have driven 3 bikes about 150 miles and had very little wiggling and jiggling. I am incredibly happy with the hitch and am an etrailer customer for life.
Product arrived within two days and was in good condition. Installation was OK. Hardest part was getting the Class I hitch off the dealer had put on in 2001. I needed this one for a rear shelf attachment. I couple of tips below, however they may only apply to my situation: 2001 Jeep Wrangler Sahara 4.0.
1. To get the old hitch off which was a side and bottom mount, I had to remove the plastic bumper end caps.
2. As indicated in the diagram the silver carriage bolt plates should be inserted with the hole end towards the rear.
3. To use a torque wrench on the passenger side front nut, I had to remove the two screws holding the exhaust pipe hanger and let it sag temporarily.
This hitch receiver is very well built of high quality materials. Perfect fit, all parts were included and it came with accurate, easy to understand instructions. I added the reflective strips after the fact. They were not included with the hitch. I couldn't be happier.
Easy install and quick shipping
Only problem is the tailpipe rattles against it
Pro tip: mount the trailer plug in the hollow, stock bumper easy to do as well
Matt
3/14/2022
Very pleased with the ease of install. I recently removed the hitch to address some surface rust on my frame and re-install was just as easy. Only issue I have is that my exhaust tailpipe rattles against the hitch so I will need make some adjustments to my exhaust
I can't believe it's been a year already! I meant to leave a review in early 2019 about how easy the install was on my 2004 Wrangler Sport TJ, how clear the instructions were, how quickly the order shipped, and how competitive the pricing was ... but a year goes by quickly with a Jeep!
In the last year I've pulled trailers loaded with mulch and more, multiple boats, and even one of those hitch racks for the cooler. This hitch has never missed a beat.
Probably the best testimonial I can give is the stump extraction: I removed about a dozen ornamental bush stumps with a 2" tow strap loop and a chain -- piece of cake!
If you're on the fence, don't think twice. This hitch will bring a whole new sense of utility to your Jeep for years to come.
Put on my jeep 97 SE TJ. Great paint, easy installation every thing required was in the kit. 10mins to put together. Super fast delivery.
Jared
2/1/2020
Install on a 97 Jeep wrangler a year ago in Iowa winters and no rust. Use it more of a anchor when I get stuck. Tough as nail no bends or wear.
Great product and great service. I would give this product and this company a 5 star rating in all categories.
1- Web site 5
2-Customer service 5 - Thank You - George J
3- Product video 5
4- Installation video 5
5- Delivery 5
I priced out a complete receiver hitch installation kit from a local dealer and was quoted $310.00 Purchased the receiver hitch for my 2004 Jeep Wrangler from etrailer for much less than that and my son and I did the install in less than 30 minutes.
I shop on line for just about all purchases (107 in the last six months) This company is at the top of my list on all aspects of on line orders.
I needed a trailer hitch for a small utility trailer and a bike rack. I was hesitant about ordering a hitch as the dealer had replaced the factory bumpers with tubular ones. I had read that this is sometimes an issue with clearance for the hitch. However, in a response to an earlier question on the site, etrailer had responded how much clearance was needed and where to measure from on the frame. I measured and had 1/4 inch to spare so I went ahead and ordered. It fit using the factory holes, and the reverse fishing technique as described in the directions worked perfectly and it was installed within a matter of minutes. Very pleased with the hitch and highly recommend it!
Vehicle: 2000 Jeep Wrangler Sport
This is a two part review. The first is etrailer and their service. This was my first experience with them and I am IMPRESSED. I placed the order Tuesday night at 8:30 and it was delivered at 12:30 Thursday afternoon. Their communication is excellent. Their website is fantastic for tracking the shipment. I found myself checking it more often than I should have just to watch the progress on the map.
Part two: the receiver. Everything was right, nothing was damaged, everything fit, everything worked the first time. The packaging was good. The Curt receiver is solid with good welds and good paint. The holes lined up. The instructions were good enough. Oh yeah my only complaint is the carriage bolt heads were a little to big to fit through the hole in the frame. I had to cut maybe 1/8" off one side. Other than that you need to have a little patience in fishing the wire down through the frame. The first one took me at least 20-30 minutes and some serious words. The second one went though the first try and took 2 minutes.
This receiver is bigger than is needed for my Jeep but it keeps the hitch the same size as our truck and as long as I don't try to pull 4000LBS with it, oversize won't hurt. It was only $20 more for the 2".
All in all I'm very happy with the purchase and with etrailer.
Great product. Easy installation. Fit nice.
Great quality and easy to install as per instructions. Thanks for a good product and helpful videos. The wiring harness was even easier to install (except for accumulation of dirt in my face from the covers.) use of safety goggles might be a good tip. My bumper is hollow on the back. Actually a piece of U channel, so after glueing a magnet to the plug I can hide all wiring out of sight behind it.
Product came in a timely manner. Bolted right up to the frame. No hassle and straight forward installation instructions. Looks good and holds my Thule t2 pro xt rack very snuggly.
Will recommend.
Product came in a timely manner. Bolted right up to the frame. No hassle and straight forward installation instructions. Looks good and holds my Thule t2 pro xt rack very snuggly.
Will recommend.
Installed on a 2004 jeep wrangler. Installation was really easy and fast. Etrailer videos made installation a breeze. Installed by myself, only hard part was lifting hitch in place and catching the bolt, but I was able to lift one side into place and balance the other side on my knee. After that just install the rest of the bolts and make sure you have a 1/2 torque wrench that can tighten to 110 ft lbs. I highly recommend this hitch!
Perfect fit. Quality product from Curt. How-to installation video by etrailer.com team clear, concise, and spot on. About 30 minutes to install.
All products ordered were in stock and shipped same day. Really like the comprehensive tracking page that shows progress on map, lists how-to videos, and other information about your products (all in one place).
Needed a hitch for my 05 Unlimited Rubicon that didn't bolt from the side of the frame. This was perfect! 4 bolts, super simple install, and it looks great! I would recommend this hitch to anyone with a 1997-2006 Jeep TJ or Unlimited.
Great product, fantastic accompanying hardware... particularly with regard to the wire to fit the bolt up into the frame with. Most companies wouldn't care enough to send anything like that with the order. There was a problem with the transaction, someone from the company called me immediately and I re-placed the order using PayPal with no issues. Shipping was quick and the product itself is very good quality. Keep up the good work. Thank you.
13408 Class III Hitch Wrangler - quality product; easy to install; looks great on the Jeep; excellent price & quick delivery.
Hitch was delivered faster than I expected. Ordered on Yuesday and delivered on Friday. I took the time to make sure the bolts were already freed up from the rust on my Wrangler so when I installed the hitch it actually only took 10 minutes.
Was towing the jet ski 30 minutes later.
The trailer hitch receiver arrived quickly and installed easily. Appears to be well built and looks good. No complaints.
received the hitch quickly after ordering - install was as easy as stated and took the removal of 2 bumper bolts and installation of 2 others then replacing them - tighten all 4 down and ready to go - fit was tight but it should be - highly recommended
Placed internet order on a Monday evening and received order on Wednesday evening. Impressed with speedy fulfillment of order. All items were correct and packaged adequately. I strongly recommend Etrailer.
The hitch fit well as you said. We did have trouble withe the holes in the frame weren't as your instructions described, but once wee modified the holes everything went ok. We are well satisfied with the product.
I just installed it. It was easy to install. Etrailer made sure I had everything I needed. It has a great paint job and it is of high quality.
Great sturdy product, excellent finish, I have an 02 wrangler and the access hole they tell u to use is too small for the bolt head, just use the hole the hitch lines up with, once I figured that out it only took 5 mins !
Customers compare 13408 to these similar products
Alan B.
4/13/2020
Im very pleased with the hitch. I haul a small utility trailer occasionally and havent had any problem at all. Finish is holding up well and no signs of corrosion at all. Great product from a great supplier. Thanks Etrailer.