You seem to have an older thule cargo box which they do not make anymore. If you're not wanting to get a new box you will have to rig something up to get the box to work with your bars. You will have to drill out one hole and use an existing hole for each mounting location. If you're looking to keep your box, this is the route you need to go since they do not make your box anymore. These brackets # CTC-18PARTS have mounting holes about 4 inches apart so they will fit around your crossbars... view full answer...
We do not have any conversion kits, but the Opti-Brite Headlight Conversion Kit - Sealed Beam to LED - 4" x 6" - Aluminum - High Beam # HLL79HB-2 according to the manufacturer is a 2 prong setup that should be compatible. It has a green wire that goes to ground and a red wire that goes to power. view full answer...
Yes, the Replacement Key # GL49FR will work on your EF320 lock cylinders. The key fits FIC 320 lock cylinders with HF, EF and CF codes. view full answer...
The Replacement Bolts for Thule Fit Kit for Podium Style Foot Pack # 7524498001 are not the same style of bolts needed to secure a Thule roof rack to your 2021 Mazda CX-5 flush rails.
I took a look at the instructions for 183160 fit kit designed for your vehicle and it looks like the correct replacement bolt is part 50435 but since this fit kit has been discontinued (as of May 2023) this isn't a part that's readily available.
I imagine Thule will eventually come back out with a fit kit... view full answer...
You will need to order the Replacement Hardware Kit # RHK and in the box labeled Hitch Item Number you will need to put the Draw-Tite Trailer Hitch Receiver # 76138. view full answer...
You are able to order replacement hardware for the Curt Trailer Hitch Receiver # C13315 for your 2022 Mazda CX-5. The Replacement Hardware Kit # RHK will allow you to type in your hitch number(C13315) and order all the hardware needed to install your receiver. view full answer...
We do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06130 this is the clip and the contact pad for the Yakima roof rack systems and will come with two 130 clips and the appropriate pads.
I do not have them available seperately. view full answer...
Great choice on the Kuat Beta # B202-2!
To keep the front tire stable you can use any kind of strap really. The Snap-Loc Cam Buckle Cinch Strap # SLTC103CR is a simple solution or I've even used a bungee cord before - it doesn't have to be anything fancy. view full answer...
What you could use to raise up the Flint Hill Goods Cargo Carrier part # FHG77ZR that you have is the Curt Multipurpose ball mount # D210 which will give you additional vertical height and would be rated for the weight of your scooter and the carrier. view full answer...
You are correct that the process of removing old grease seals can distort their shape and make it tougher to measure their inner and outer diameters. Part numbers from the originals are the preferred way to find replacement parts but the other option is to measure your spindles at the various points where the seal and bearings ride. The linked diagram shows you these points on the spindle that you can measure with your digital caliper. This is more reliable than measuring the old parts... view full answer...
We have INNO roof racks that are a fit for your 2014 Mazda CX-5, but none of them use the foot kit part # INXR that you referenced.
If you have a totally naked roof you would want the part numbers # INB127, # INSUT, and # INK758.
Or, if you have a roof rack that has rails that run from front to back you would want the part numbers # INB127 and # INFR. view full answer...
I do see the etrailer Trailer Hitch Receiver # e98902 you purchased for your 2020 Mazda CX-5 will also fit your new 2023 Mazda CX-5. The Replacement Hardware Kit # RHK will provide you with new hardware for the this receiver. Be sure to enter this hitch number when ordering the hardware kit to ensure you get the correct hardware. You will find the instructions for the receiver linked below. view full answer...
Sounds like you need the Replacement Bent Towing Receiver, part # SP325 for your Swagman Traveler XCS, part # S64664.
The # SP325 fits over 2 inch square ball mounts and includes the mounting hardware. view full answer...
Yes, the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle # K71-652-00 is the perfect replacement for your # TREQ356 equalizers. These are actually compatible as a replacement for equalizers that measure between 5-1/4" and 6-1/4" between the horizontal bolt hole centers (see attached photo). This equalizer has a vertical bolt hole distance that is 1/4" shorter than your current application but that is acceptable for this application. view full answer...
I have good news for you! This particular Yakima Replacement Sleeve # Y8890342 will work with your Yakima HighLite2. It was only the Yakima DoubleDown hanging racks that were made before 2014 that will not work with this adapter. view full answer...
I checked with Thule and they do not offer just the rubber pad that's on the strap that comes with the # 7521682001 so you'd have to order the entire assembly. view full answer...