We have the replacement screw you are looking for with the part # Y8880150 which matches up to the nut of the # Y8880279 which is M6. view full answer...
You will need to take a couple of quick measurements to see if the replacement steps we offer will work on your Forest River Trailer.
One of the 2-step pull-out steps we offer is the Flexco Manual Pull-Out Steps, part # SMFP-2100. This has a retracted height of 9 inches and is designed to be mounted in a space that measures 27-5/8 inches wide x 12 inches deep. The steps are 24 inches wide. Per Lippert, the 2-step Lippert # LC432682 step will fit in the space that the single step was installed.... view full answer...
There's still a really good chance the trailer wiring install harness for your 2019 Hyundai Santa Fe is present which will allow the Curt T-Connector part # CU94FR to install. This plugs into your Hyundai Santa Fe's factory tow package wiring harness, which is located behind the rear bumper on the driver's side of your vehicle. I attached a picture of where the harness will be plus a link to the install instructions as well.
You might check the pins for voltage with a circuit tester like... view full answer...
The lights in the Rola Swinging Enclosed Cargo Carrier for 2" Trailer Hitch, part # 59109, are sealed. You cannot replace the bulbs, but you can replace the lights. It would require prying the light fixture from the grommet, disconnecting the plug from that light fixture, and connect it to the new light fixture. Once that is done you can install the new grommet, if needed, and the new light fixture.
You can go with a regular incandescent light fixture, such as the Optronics Trailer Tail... view full answer...
The Curt hitch part # C13153 is a confirmed fit for your 2017 Hyundai Santa Fe Limited and would be a great option for towing a camper like your Micro Minnie. The next thing you need is trailer wiring to control the taillights of your trailer. For that the Curt harness part # C56184 is a great option as it's easy to install and very reliable.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch... view full answer...
Yes. The K-Source Replacement Side Mirror - Electric - Black - Driver Side # KS65526Y is designed to replace OE part number 876103Q300. This is noted on the product page and is going to be a like for like replacement for your factory driver's side mirror on your 2014 Hyundai Sonata. view full answer...
The Replacement Cover # 852-2382001 will fit your Thule 460R Rapid Podium foot. This is the same cover which is used on the 460 Podium foot. view full answer...
Our part number for the Hollywood Racks Sport Rider HR1500 that you referenced is the part # HLY84FR. This rack has had several previous part numbers so it could be possible you have seen an outdated weight capacity. This rack has an 80 lb per bike capacity currently. view full answer...
The hitches made for your 2011 Hyundai Sonata are light-duty Class I types that have a 1-1/4-inch receiver opening. For these you will need a compatible Class I ball mount, part # 3593, which comes with a pin & clip.
If you also need a hitch ball you can use either 1-7/8-inch ball # 19256 or 2-inch ball # 19258. view full answer...
In order to receive the 4 frame washers for your Draw-Tite hitch on your 2019 Hyundai Sonata, you'll just need to use # RHK.
All you'll need to do is enter in your hitches part number in "Hitch Item Number", and in the "Manufacturer" drop down, select Draw-Tite, and you'll be sent a new set of hardware for your hitch. view full answer...
The bolts included with the Draw-Tite Class III # 75471 Hitch are Class 10.9. They're 10mm in diameter, 30mm long and have a 1.25 thread pitch.
If you're needing replacement installation hardware, we can supply a replacement hardware kit for you. You'd use part # RHK, and on the product description page you're taken to, you'd input 87414 for the hitch part number and Hidden Hitch as the name of the manufacturer (as shown in the diagram I provided.)
To see other accessories available for... view full answer...
Sorry to hear about that, and I can tell you that etrailer does ship our trailer hitches with hardware. For the Curt Trailer Hitch Receiver # C11471 what you will need is the Replacement Hardware Kit for Trailer Hitches # RHK.
All you need to do is click # RHK, enter "C11471" in the "Hitch Item Number" box, select "Curt" from the drop-down menu, and hit “Add to Cart” to place your order. view full answer...
The closest option we have to the stock passenger side mirror on your 2014 Hyundai Sonata is the K-Source # KS65531Y. This will maintain the amber light turn signal on the back of the assembly, the power remote capability, and breakaway design, but it does not have the blind-spot mirror/detection function. It would also need to be painted to match the your Sonata's OEM red. view full answer...
Mounting a roof rack onto a car with a naked roof usually requires three component groups: the fit kit with uniquely shaped rubber pads and hooks, the towers, and the crossbars. In this case, the rubber pads of the fit kit on your car needs replacing. Manufacturers don't sell the individual rubber pads for each fit kit because of the sheer amount of work that goes into making sure each pad and hook fits each specific vehicle and to keeping them in inventory. Also, if one of your rubber... view full answer...
The K-Source Replacement Side Mirror for the Driver Side # KS65554Y and Passenger Side # KS65553Y are confirmed to fit the GT trim of the US spec 2015 Hyundai Elantra. If your Elantra is not a GT these mirrors will not fit and we currently do not have any other replacement options for the Elantra. view full answer...
According to my research the Greystone Standard RV Microwave # 324-000105 is about the same size as your Advent microwave, but this microwave is designed to sit on a surface and doesn't have attachments for mounting brackets (see attached).
I'm not sure of the design for your brackets so this style may still work out, but you'll want to compare what you have with the photo to determine fitment. The overall width (without the trim kit) is 19" so that base is going to be about 17" wide at... view full answer...
It sounds like you're looking for an adjuster spring and in which case we do carry this, the Replacement Adjuster Spring for 10" x 2-1/4" Hydraulic Trailer Brakes part # 046-083-01 which works on both Dexter and Demco hydraulic trailer brake assemblies. view full answer...
It looks like the older 945 version of the Thule Hitching Post was designed for a 2" hitch so you may have a newer version that would require the Adapter # 853-7489. If you can send me some photos of your current bike rack I can help you determine what you have and what adapter will be needed.
The adapter # 853-7292 that you referenced is not a fit for a Thule Hitching Post bike rack.
I have attached a link to a video of the 7489 adapter that you can check out. view full answer...
There unfortunately isn't a guide to tell us the model number of the vent installed in your 2002 Casita Liberty Deluxe so you'll need to try and find a sticker somewhere on the vent that shows the model number. If you remove the inner garnish ring # FVK1060-81 you might be able to see the circuit board or another component with some identifier on it. If not then I recommend just matching up the measurements of the # FVK1020-19 with your current vent lid. This lid fits the following models:... view full answer...
Go To Results